Curb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides. Exception: Diagonal curb ramps shall comply with Section 11B-406.5.9....
Search Results "Raised Crossing"
Filters
Commonly Searched Documents
-
11B-406.5.1 Location
-
11B-406.5.1 Location
Curb ramps at marked crossings shall be wholly contained within the markings, excluding any flared sides. Exception: Diagonal curb ramps shall comply with Section 11B-406.5.9....
-
Identification [4.3.11.5]
Requirements for tactile (raised and Braille) signage apply to exits and other designations of "permanent rooms and spaces."...
-
Issue 13: Stub poles
which the APS volume had to be set to be quite loud in order to be heard at the crosswalk and where using the tactile arrow and vibrotactile WALK indication could result in a hazardous crossing...
-
Numeric Keys: ADA Standard Section 707.6.2
Numeric keys shall be arranged in a 12-key ascending or descending telephone keypad layout. The number five key shall be tactilely distinct from the other keys. Advisory 707.6.2...
-
11B-707.6.2 Numeric keys
Numeric keys shall be arranged in a 12-key ascending or descending telephone keypad layout. The number five key shall be tactilely distinct from the other keys. Advisory...
-
Significant alternatives which minimize any significant economic impacts on small entities
Maximum cross slope of 2 percent required on pedestrian access routes, including within pedestrian street crossings with yield or stop control....
-
Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
ASTM safety standards recommend that identification be posted on Exit doors leading to a staircase SetonGLo Custom 6"W x 6"H photoluminescent signs identify stairs and floor levels with raised...
-
M303.2.6 Edge Protection
Where wheelchair spaces are provided on a platform raised more than 1 ½ inches (38 mm) in height, edge protection 2 inches (51 mm) high minimum measured from the surface of the platform...
-
11B-705.1.1.3 Color and Contrast
Detectable warning surfaces at transit boarding platform edges, bus stops, hazardous vehicular areas, reflecting pools, and track crossings shall comply with Section 11B-705.1.1.3.1....
-
Where to Measure Along the Route
-
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
This guidebook is the second part of a two-phase project focused on designing sidewalks and trails for access. It was created to provide planners, designers, and transportation...
-
Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
Sidewalks and trails serve as critical links in the transportation network by providing pedestrian access to commercial districts, schools, businesses, government offices, and...
-
Step 2: Identify the Presence of Limiting Factors
Does the combined trail running slope (grade) and cross slope exceed 1:2.5 (40 percent) for a continuous distance of 20 feet (6 meters) or more?...
-
Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages....
-
Which transition type do users with disabilities prefer?
When a sidewalk slopes more than 2% in the direction of travel and a walk with a maximum 2% cross slope intersects it, which transition segment type provides the safest usability for the...
-
Exterior Routes
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
-
Exterior Routes
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
-
General: ADA Standard Section 703.1
Signs shall comply with 703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual,...
-
Exit Doors: ADA Standard Section 216.4.1
Section 216.4.1 covers scoping requirements in the current ADA Standards for signs at exit doors.
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and...
-
11B-703.1 General
Signs shall comply with Section 11B-703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one...
