303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
Search Results "Raised Crossing"
-
Exterior Routes
-
Step 2: Identify the Presence of Limiting Factors
Does the combined trail running slope (grade) and cross slope exceed 1:2.5 (40 percent) for a continuous distance of 20 feet (6 meters) or more?...
-
General: ADA Standard Section 703.1
Signs shall comply with 703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one with visual,...
-
11B-703.1 General
Signs shall comply with Section 11B-703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one...
-
Exit Doors: ADA Standard Section 216.4.1
Section 216.4.1 covers scoping requirements in the current ADA Standards for signs at exit doors.
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and...
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and...
-
11B-703.1 General
Signs shall comply with Section 11B-703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one...
-
Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages....
-
THE UNITED STATES OF AMERICA’S STATEMENT OF INTEREST ON THE PARTIES’ MOTIONS FOR SUMMARY JUDGMENT
The steps make the raised porches inaccessible and unnecessarily relegate individuals who use wheelchairs to separate entrances. Order 12, Aug. 31, 2011, ECF No. 109. ...
-
4.10.12(2)
Raised and Braille characters and symbols shall comply with 4.30....
-
Inputs
Inputs The Department sought public comment on whether there was a need to revise the proposed requirement for tactilely discernible input controls to allow for accessible touch...
-
Figure 11B-407.2.3.1 Floor designation
SECTION TITLE NOTES Figure 11B-407.2.3.1 Floor designation. Revises the braille...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
The standards specify a maximum height (27”) for the leading edge of barriers so they are within cane sweep, but a minimum height is not specified. Curbs may be mistaken for a step...
-
F206.2.5 Restaurants and Cafeterias
In restaurants and cafeterias, an accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas....
-
ADA Sign Depot Stairwell Floor Level Sign with Tactile Text and Grade 2 Braille - 12" x 12"
Stairwell Floor Level Sign - 12" x 12" ADA compliant non-glare matte finish ADA compliant font and tactile (1/32 inch raised) letters ADA compliant 12" x 12" size...
-
Issue 1: APS volume
Directional guidance from audible pedestrian signals for street crossing. Ergonomics. 2004. Vol. 47, (12), 1318 – 1338. 10. Carroll & Bentzen. p. 14. 11....
-
206.2.5 Restaurants and Cafeterias
In restaurants and cafeterias, an accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas. EXCEPTIONS: 1....
-
11B-705.1.1.3 Color and Contrast
Detectable warning surfaces at transit boarding platform edges, bus stops, hazardous vehicular areas, reflecting pools, and track crossings shall comply with Section 11B-705.1.1.3.1....
-
406.6 Diagonal Curb Ramps
Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings....
-
406.6 Diagonal Curb Ramps
Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings....
-
406.6 Diagonal Curb Ramps
Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings....
