Steeper than 1:20 (5 percent) 1:12 (8.33 percent) 50 feet (15 meters) 1:12 (8.33 percent) 1:10 (10 percent) 30 feet (9 meters) Cross...
Search Results "Raised Crossing"
Filters
Commonly Searched Documents
-
Slopes and Resting Intervals for Beach Access Routes
-
Accessible Sidewalks 4: Pedestrians who are Blind
Requires the Registered User plan or above. Login! -
Slopes and Resting Intervals for Outdoor Recreation Access Routes
Design Tip The cross slope requirement depends on what material is used. Those who use a mobility device know that as cross slope increases, travel becomes more difficult....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on both sides of platforms,...
-
6.7.1.3
A grade of up to 1:10 (10 percent) is permitted for up to 30 feet (9 m) of a beach access route. Resting intervals complying with section 2.3 shall be provided at distances of no...
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on one side of the platform,...
-
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
Source: U.S. Department of Transportation / Beneficial Designs, Inc. Document: 484 pages (9.30 MB PDF) Publication Date: September 2001 This guidebook is the second part of...
-
1018.4 Clear Width
An exception permits the clear width of beach access routes that are not removable to be reduced to 48 inches minimum at dune crossings....
-
4.10.12(2)
Raised characters and symbols shall comply with 4.30....
-
Pedestrian Access Points to a Beach
Access Points include parking facilities that serve beaches, dune crossings, and stairways or ramps leading from boardwalks, walkways, or parking spaces to the beach....
-
2.4 Slope
The running slope (grade) and cross slope of ORARs shall comply with section 2.4. ...
-
1010.1.9.7 Delayed egress locks
shall pass through not more than two delayed egress locking systems provided the combined delay does not exceed 30 seconds. 5.1 A tactile sign shall also be provided in Braille and raised...
-
407.4.7.1.2 Location
Raised character and braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
407.4.7.1.2 Location
Raised character and braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2....
-
407.4.7.1.2 Location
Raised character and braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
1.1.10 Ramps
Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections 1.1.11, 1.1.12, 1.1.13...
-
Accessible Slopes
Put one end at the high point of the surface and raise the other end so that the bubble is in the middle of the level’s gauge. The level is now level....
-
Access Board: How People with Low Vision or Blindness Approach Tactile Signs
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Access Board: Signs
-
1010.1.9.8.1 Delayed egress locking system
A tactile sign shall also be provided in Braille and raised characters, which complies with Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5....
