11B-607.2 Clearance....
Search Results "Hinge Side Clearance"
Commonly Searched Documents
- 
    
  
  11B-607.2 Clearance
  
- 
    
  
  11B-502.5 Vertical clearance
  Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ... 
- 
    
  
  11B-502.5 Vertical clearance
  Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ... 
- 
    
  
  304.3.2 T-Shaped Space
  The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm.... 
- 
    
  
  M9
  Does the lavatory have at least a 29-inch-high clearance under the front edge and the top of the rim no more than 34 inches above the floor?... 
- 
    
  
  304.3.2 T-Shaped Space
  The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm.... 
- 
    
  
  Seating [4.32.2] and Knee Clearance [4.32.3]
  Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches.... 
- 
    
  
  11B-502.5 Vertical clearance
  Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADA Standards] 502.5 Vertical Clearance.... 
- 
    
  
  11B-607.2 Clearance
  A lavatory complying with Section 11B-606 shall be permitted at the control end of the clearance.... 
- 
    
  
  11B-304.3.2 T-Shaped space
  The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ... 
- 
    
  
  11B-304.3.2 T-Shaped space
  The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm.... 
- 
    
  
  Vertical Clearance [§307.4]
  Vertical Clearance [§307.4] Headroom clearance of at least 80” high is required along all circulation paths (except at doors and doorways where a 78” minimum clearance is permitted to... 
- 
    
  
  11B-304.3.2 T-Shaped space
  The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ... 
- 
    
  
  304.3.2 T-Shaped Space
  The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space... 
- 
    
  
  408.4.3 Platform to Hoistway Clearance
  408.4.3 Platform to Hoistway Clearance. The platform to hoistway clearance shall comply with 407.4.3.... 
- 
    
  
  Clear Width of Circulation Paths and Maneuvering Clearances at Wheelchair Spaces
  on buses, OTRBs and vans, are typically confined on three sides by seats, side walls, or wheel wells.... 
- 
    
  
  304.3.2 T-Shaped Space
  The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space... 
- 
    
  
  306.1 General
  Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element.... 
- 
    
  
  Clear Floor Space [4.20.2]
  ADAAG allows a lavatory on the same plumbing wall to overlap the clear floor space at the tub because knee and toe clearance is available below an accessible lavatory.... 
- 
    
  
  11B-606.7 Sink depth
  Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306.... 
- 
    
  
  Beds: ADA Standard Section 807.2.3
  Where beds are provided, clear floor space complying with 305 shall be provided on at least one side of the bed.... 
- Bobrick B-30929 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
- 
    
  
  11B-807.2.3 Beds
  Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed.... 
- Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
