accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components: Accessible routes complying with Chapter 11A, Section 1110A.1...
Search Results "Enhanced 9-1-1"
-
1009.2 Continuity and components
-
Bobrick Clothes Hook B-233
Hook is 1 1⁄4" x 1 1⁄4" (30 x 30mm) and projects 1 1⁄8" (30mm) from wall. Unit is 2 1⁄4" (55mm) high....
-
§104.36 Procedural safeguards.
[45 FR 30936, May 9, 1980, as amended at 65 FR 68054, Nov. 13, 2000]...
-
224.4 Guest Rooms with Communication Features
2 to 25 2 26 to 50 4 51 to 75 7 76 to 100 9...
-
ADA Standards for Accessible Design
ADA Standards for Accessible Design ________________________________________________________________ 9/15/2010 The U.S....
-
MONETARY RELIEF
Within forty-five (45) days of the United States notifying PPD of its determination and PPD receiving both a signed release (Attachment C) and a completed and signed W-9 from an aggrieved...
-
907.5.2.3.4 Groups R-2.1, R-3.1 and R-4
ETA Editor's Note The remainder of California Building Code Chapter 9, is not adopted by the Division of the State Architect - Access Compliance (DSA-AC), and has been omitted....
-
4.1 Transition Plan Standards.
Transition plans were required for airport facilities owned by airports by November 1, 1996, as part of the amendment to 49 CFR § 27.71(g))....
-
11B-1009.2.1 Pool lift location
Exceptions: 1. Where the entire pool depth is less than 36 inches (914 mm) or greater than 48 inches (1219 mm), compliance with Section 11B-1009.2.1 shall not be required. 2. ...
-
1011.3 Operable Parts
EXCEPTIONS: 1. Fire rings, grills, fireplaces, wood stoves, water hydrants, and water utility hookups shall comply with 309.4 to the extent practicable. 2. ...
-
Height Requirements
this exception has been recast as a general exception from section 309 and has been relocated to the scoping requirement for operable parts in Chapter 2 (see section 205.1, exceptions 1,...
-
1007.3.2 Golf Club Reach Range Area
shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope not steeper than 1:...
-
B. What does an accessibility survey entail?
The forms and instructions contained in Appendices 1 and 2 will guide surveyors through this process, which generally entails: identifying the features at the facility that need...
-
§382.3 Conforming alternate version
At least one of the following applies to a conforming alternative version: (1) The conforming version can be reached from the non-conforming page via an accessibility-supported mechanism...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1016.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
Shooting Facilities
Fixed firing positions must have a 60-inch diameter space with slopes not steeper than 1:48 so a wheelchair user can turn around and have a level place from which to shoot....
-
Clear Deck Space
The slope of the clear deck space must not be greater than 1:48 (2%)....
-
SEAT HEIGHT MEASUREMENT DETAIL
Dental chairs, for example, have a typical 1 ¼-inch bolster height....
-
2. Prioritization of Access Improvements
Prioritization of Access Improvements Pedestrian facilities shall be prioritized as follows: 1. City of Los Angeles government offices and facilities; 2....
-
308.3.1 Unobstructed
[ECTCR UFAS 4.2.6, Fig. 6(b)] EXCEPTIONS: 1....
-
610.3.2 L-Shaped Seats
The rear edge of the "L" portion of the seat shall be 1½ inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the...
-
226.1 General
EXCEPTIONS: 1. Sales counters and service counters shall not be required to comply with 902. 2....
