Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
Search Results "Hybrid Surface System"
-
11B-1009.3.1 Sloped entries
-
Section 35.151(i) Curb ramps
Upon further consideration, however, the Department has concluded that the regulation should acknowledge that there are times when there are transitions from sidewalk to road surface that...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use....
-
2.2.1 Demographic Information
., power chair, scooter), and within each type: make, model, age, armrests, footrests, drive wheels, controller, seat support surfaces and overall condition of the seating surface....
-
4.6.3* PARKING SPACES
Parking spaces and access aisles shall be level with surface slopes not exceeding 1:50 in all directions....
-
Is an accessible route required to rooftop levels?
., equipped with lighting, ventilation, and means of egress) that is “included between the upper surface of a floor and upper surface of the floor or roof next above” (§106.5)....
-
§ 38.95(c)(8) Handrails
grasp them from outside the car while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp surface...
-
§ 38.83(c)(8) Handrails
them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp surface...
-
§ 38.125(c)(8) Handrails
grasp them from outside the car while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp surface...
-
American Standard Madera 1.28 gpf EverClean Toilet with Exposed Manual Flush Valve System Top View
-
American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System Plan View
-
American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System Front View
-
American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System Plan View
-
American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System Front View
-
American Standard Madera 1.28 gpf ADA Toilet with Exposed Manual Flush Valve System Side View
-
American Standard Madera 1.6 gpf ADA Toilet with Exposed Manual Flush Valve System Side View
-
American Standard Madera 1.28 gpf EverClean Toilet with Exposed Manual Flush Valve System Front View
-
American Standard Madera 1.28 gpf EverClean Toilet with Exposed Manual Flush Valve System Side View
-
Best Bath Systems ADL Spa Electronic Touch Control Series Slide-Door Bath Tub Details
Requires the Premium User plan or above. (Login or upgrade your account!) -
Section 36.303(g)(7) Compliance Date for Providing Captioning and Audio Description
The Department also proposed to give movie theaters that converted their auditoriums with analog projection systems to digital projection systems after the publication date of the rule an...
-
M305.2.7 Clearance (Section-by-Section Analysis)
Specifically, the Access Board sought input from the public in question 22, on whether transfer supports on diagnostic equipment could provide 1½ inches minimum clearance around the gripping surface...
-
6.3 Minority Reports
6.3 Minority Reports Because the Advisory Committee did not achieve consensus on the recommendation for a minimum transfer surface height standard, U.S....
-
M305.3 Standing Supports (Section-by-Section Analysis)
The Access Board sought public input in questions 39 and 40 in the MDE NPRM preamble on whether the cross section dimensions for gripping surfaces should be applied to standing supports...
