shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope not steeper than 1:...
Search Results "Grade 1 Braille"
Filters
Commonly Searched Documents
-
1007.3.2 Golf Club Reach Range Area
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
1007.8 Exterior area for assisted rescue
the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum 1-...
-
308.3.1 Unobstructed
EXCEPTIONS: 1. An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
Obstacles [1018.5]
When beach access routes are constructed of materials other than concrete, asphalt, or boards, obstacles cannot exceed 1 inch in height at their highest point....
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
Detailed Age Demographics
12 45-54 30 55-64 25 65-74 4 75-84 1...
-
1003.2.13.7 Exterior area for assisted rescue
the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum 1-...
-
H.2. - Does Section 508 apply to a Federal agency's existing EIT procured prior to June 21, 2001?
(For a discussion on how maintaining EIT which existed prior to June 21, 2001 may be subject to the enforcement provisions of Section 508, see sections G.7, G.8, and H.1)....
-
Technical Memorandum TM 2013-18 Sinks
TM 2013-18 Sinks Effective Date: June 1, 2013 2012 TAS Reference: 212.3 and 804.4 Kitchens / Kitchenettes with Sinks If a sink is provided in a space that is subject...
-
606.3 Height
EXCEPTIONS: 1....
-
607.4 Grab Bars
EXCEPTIONS: 1....
-
§35.151(c)
. _____) shall be deemed to comply with the requirements of this section with respect to those facilities, except that the elevator exemption contained at §4.1.3(5) and §4.1.6(1)(j) of ADAAG...
-
[A] 104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note DSA-AC has adopted Section 104.11 as follows, effective July 1, 2015: [A] 104.11 Alternative materials, design and methods of construction and equipment. ...
-
1134A.6, Item 7
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...
-
11B-610.3.2 L-shaped seats
The rear edge of the “L” portion of the seat shall be 1½ inches (38 mm) maximum from the wall and the front edge shall be 14 inches (356 mm) minimum and 15 inches (381 mm) maximum from the...
-
E102.9 Worldwide Web Consortium (W3C)
Web Content Accessibility Guidelines (WCAG) 2.0, W3C Recommendation, December 2008, IBR proposed for Sections E205.1, E207.2, 405.1 Exception, 501.1 Exception 1, 504.2, 504.3, 504.4, and...
-
308.3.1 Unobstructed
EXCEPTIONS: 1. An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
Scoping [4.1.3(8)]
Scoping [4.1.3(8)] Public entrances must be accessible according to two sets of criteria that must be met separately: 1) the minimum number of accessible building or facility entrances...