Product Features and Benefits 1 or 3-hole 4" installation Rigid spout 5 1/2" long, 5 9/16" high Metal lever handle Red/blue indicator 50/50 pop-up 14" flexible supplies...
Search Results "Grade 1 Braille"
Filters
Commonly Searched Documents
-
Delta Single Handle Centerset Lavatory Faucet 583LF-WF
-
TownSteel "LS" Rose Tubular Lockset
Specifications: Door Thickness 1-3/4" standard, other upon request Backset 2-3/4" standard, 2-3/8" available Rose Brass, Steel or Stainless Steel, 2-1/8" x 3/8" Lever Brass, Stainless...
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
Patient support safety factors: Patient support devices must meet applicable safety factors as delineated in IEC 60601-1. These factors typically range from 4x to 8x....
-
Sections 35.108(e) and 36.105(e)—Has a Record of Such an Impairment
under the ADA provides that an individual with a record of an impairment that substantially limits or limited a major life activity is an individual with a disability. 42 U.S.C. 12102(1)...
-
Don-Jo Mfg., Inc. Pull Plate CFC7015
Number CFC7015 Dimensions 3-1/2" x 15" Ctc 6" Diameter 3/4" Projection 2-1/4" Clearance 1-...
-
Outdoor Extreme Mobility Nomad All Terrain Power Wheelchair
Reverse indicator Anti-tip wheels Durable frame constructed of 6061 schedule 40 aircraft aluminum Rear dual-shock suspension Corrosion resistant powder coated frame Sealed marine grade...
-
McGuire Manufacturing Co., Inc. Retrofit Insulation Kit for P-Trap
1 1/4 x 1 1/2" seamless retrofit P-Trap kit. Furnished with seamless J-Bend cover, wall bend cover, drain tailpiece, riser tube, angle stop, and wheel handle covers....
-
C101.2 Equivalent Facilitation (Section-by-Section Analysis)
alternative technological solutions for accessibility beyond those specified in the guidelines derives from the Appendix to 36 CFR Part 1193 - Advisory Guidance, Introduction, paragraph 1,...
-
602.1 General (Section-by-Section Analysis)
are derived from §§ 1194.41 and 1193.33 of the existing 508 Standards and 255 Guidelines respectively, but the requirement that electronic documentation comply with WCAG 2.0 or PDF/UA-1...
-
2.9 Conditions Not Considered Disabilities.
Examples of such conditions include: 1. 28 CFR § 35.104. Sexual behavior disorders; 2. 28 CFR § 35.104....
-
1017.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
3.4 Cinemark at Macedonia, 8161 Macedonia Commons Blvd., Macedonia, Ohio
., Macedonia, Ohio - In Auditorium 1, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their current location....
-
"Public entity.'' (Preamble, Section-by-Section Analysis)
The term "public entity'' is defined in accordance with section 201(1) of the ADA as any State or local government; any department, agency, special purpose district, or other instrumentality...
-
1007.3.2 Golf Club Reach Range Area
shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope not steeper than 1:...
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
302.1 General
EXCEPTIONS: 1. Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2....
-
1007.8 Exterior area for assisted rescue
the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum 1-...
-
308.3.1 Unobstructed
EXCEPTIONS: 1. An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
Obstacles [1018.5]
When beach access routes are constructed of materials other than concrete, asphalt, or boards, obstacles cannot exceed 1 inch in height at their highest point....
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
