Section 502.1 of the ADA Standards covers information in the current ADA Standards for accessible parking spaces.
Search Results "ANSI/IEEE: American National Standards Institute/ Institute of Electrical and Electronics Engineers"
Commonly Searched Documents
-
General: ADA Standard Section 502.1
-
General: ADA Standard Section 503.1
Section 503.1 of the ADA Standards covers information in the current ADA Standards for passenger loading zones.
-
218 and 810 Transportation Facilities
The 2010 Standards at sections 218, 810.5, 705.1, and 705.2 only require detectable warnings at transit platform edges....
-
New construction and alteration requirements
The ADA requires that newly constructed facilities, first occupied on or after January 26, 1993, meet or exceed the minimum requirements of the ADA Standards for Accessible Design (Standards...
-
410.4 Minimize Interference (Section-by-Section Analysis)
This section closely corresponds to existing 508 Standards § 1194.23(i) and 255 Guidelines § 1193.43(h), but also incorporates by references consensus standards developed since the 508 Standards...
-
11B-406 Curb ramps, blended transitions and islands
[2010 ADA Standards] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the italicized...
-
5.1.1 Transfer Surface Height Adjustability Recommendation for M301 and M302
Both electronic and manual pump chairs have the ability to stop at any position and are not limited to set points within the range....
-
IV. SPECIFIC RELIEF
References to “Standards” in this Agreement refer to the 2010 ADA Standards for Accessible Design (“Standards”)....
-
LIMITATION ON BARRIER REMOVAL OBLIGATIONS
§36.304(g)(1) The requirements for barrier removal under §36.304 shall not be interpreted to exceed the standards for alterations in subpart D of this part....
-
Clear Floor or Ground Space and Turning Space
This guide explains requirements in the ADA Standards for clear floor or ground space and turning space....
-
§ 35.151(b)(4)(ii)(C) Safe harbor
If a public entity has constructed or altered required elements of a path of travel in accordance with the specifications in either the 1991 Standards or the Uniform Federal Accessibility...
-
ARGUMENT
The revisions to the ADA Standards for Accessible Design do not change the outcome here because the 2010 Standards regarding public entrances are intended to achieve the same result as the...
- T-Base Communications
-
Are handrails required in elevator cars?
The ADA Standards do not require handrails in elevators cars....
-
11B-809.5.3 Interconnection
[2010 ADA Standards] 809.5.3 Interconnection....
-
11B-805.2.2 Beds
[2010 ADA Standards] 805.3 Clear Floor or Ground Space. A clear floor space complying with 305 shall be provided on each side of the bed....
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
[2010 ADA Standards] 223.2 Hospitals, Rehabilitation Facilities, Psychiatric Facilities and Detoxification Facilities....
-
11B-215.4 Transient lodging
[2010 ADA Standards] 215.4 Transient Lodging. Guest rooms required to comply with 224.4 shall provide alarms complying with 702....
-
E202 General Exceptions (Section-by-Section Analysis)
General exceptions apply broadly and, where applicable, exempt ICT from conformance with the proposed 508 Standards....
-
Residential Facilities
After the compliance date for the 2010 Standards, state and local governments will no longer have the option of complying with the UFAS, but will have to use the 2010 Standards for new construction...
-
Medical Device Manufacturers
If DOJ amends its ADA regulations as announced in the ANPRM, small medical device manufacturers may have an economic incentive to produce accessible products that conform to the standards...
- Rockwood Manufacturing Company 215 Tapered Door Pull 16"
- Rockwood Manufacturing Company 215L Tapered Door Pull 28"
- DORMA M9000 Series Heavy-Duty Mortise Locksets