In an emergency situation much time can be wasted if persons with disabilities must travel the full distance to the inaccessible exit door before there is a sign posted indicating that the...
Search Results "Travel Distance"
-
11B-206.4.1 Entrances and exterior ground floor exits
-
Toilet Facilities and Bathing Facilities: ADA Standard Section 809.4
Toilet and bathing fixtures required to comply with 603 through 610 shall be located in the same toilet and bathing area, such that travel between fixtures does not require travel between...
-
11B-705.1.2.2.2.1 One entrance/exit point
inches (914 mm) deep, as measured perpendicular to the curb, and the turning space shall provide a minimum 36 inches (914 mm) wide portion without detectable warnings to allow pedestrian travel...
-
11B-209.4 Valet parking
The parking space requirements of Sections 11B-208 and 11B-502 apply to facilities with valet parking, including the requirement for an accessible route of travel to the entrance of the...
-
11B-705.1.2.2.2.1 One entrance/exit point
inches (914 mm) deep, as measured perpendicular to the curb, and the turning space shall provide a minimum 36 inches (914 mm) wide portion without detectable warnings to allow pedestrian travel...
-
11B-209.4 Valet parking
The parking space requirements of Sections 11B-208 and 11B-502 apply to facilities with valet parking, including the requirement for an accessible route of travel to the entrance of the...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
703.3.1 Dimensions and Capitalization
MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm) Distance...
-
703.3.1 Dimensions and Capitalization
703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm) Distance...
-
7.2.2.1 Determining Impracticability
The combination of trail running slope (grade) and cross slope exceeds 1:2.5 (40 percent) for over a distance of 20 feet (6m). Limiting Factor 2. ...
-
11B-703.3.1 Dimensions and capitalization
between two dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm)...
-
11B-703.3.1 Dimensions and capitalization
-703.3.1 BRAILLE DIMENSIONS MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm) Distance...
-
11B-703.3.1 Dimensions and capitalization
between two dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm)...
-
1. Sloped Surfaces
While the level is in this position, measure the distance between the end of the level and the sloped surface below....
-
11B-812.5.1 Accessible route to building or facility
Exception: EVCS complying with Section 11B-812 shall be permitted to be located in different EV charging facilities if substantially equivalent or greater accessibility is provided in terms of distance...
-
11B-1008.2.4.2 Elevated
Exceptions: The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (813 mm) minimum for a distance of 24 inches (610...
-
11B-812.5.1 Accessible route to building or facility
Exception: EVCS complying with Section 11B-812 shall be permitted to be located in different EV charging facilities if substantially equivalent or greater accessibility is provided in terms of distance...
-
11B-1008.2.4.2 Elevated
Exceptions: The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (813 mm) minimum for a distance of 24 inches (610...
-
Just Manufacturing 30" Stainless Steel Grab Bar
Type-304, 18 Gauge Stainless Steel 30" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA...
-
Just Manufacturing 42" Stainless Steel Grab Bar
Type-304, 18 Gauge Stainless Steel 42" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA...
-
Just Manufacturing 24" Stainless Steel Grab Bar
Type 304, 18 Gauge Stainless Steel. 24" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA Compliant...
-
Just Manufacturing 36" Stainless Steel Grab Bar
Type-304, 18 Gauge Stainless Steel 36" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA...
