The parking space requirements of Sections 11B-208 and 11B-502 apply to facilities with valet parking, including the requirement for an accessible route of travel to the entrance of the...
Search Results "Travel Distance"
Commonly Searched Documents
- 
    
  
  11B-209.4 Valet parking
  
 - 
    
  
  11B-705.1.2.2.2.1 One entrance/exit point
  
inches (914 mm) deep, as measured perpendicular to the curb, and the turning space shall provide a minimum 36 inches (914 mm) wide portion without detectable warnings to allow pedestrian travel...
 - 
    
  
  Section 2. Slope
  
"Slope" means the relative steepness of the land between two points and is calculated as follows: The distance and elevation between the two points (e.g., an entrance and a passenger loading...
 - 
    
  
  Elevated: ADA Standard Section 1008.2.4.2
  
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (815 mm) minimum for a distance of 24 inches (610 mm) maximum provided...
 - 
    
  
  2.6 Conspicuity Ratings
  
As expected, detectable warnings that are more conspicuous are generally seen from greater distances....
 - citEcar Wheelchair 6PR SL Street Legal Golf Cart
 - 
    
  
  A4.33.6 Placement of Listening Systems
  
A distance of 50 ft (15 m) allows a person to distinguish performers’ facial expressions....
 - 
    
  
  A4.33.6 PLACEMENT OF LISTENING SYSTEMS
  
A distance of 50 ft (15 m) allows a person to distinguish performers' facial expressions....
 - 
    
  
  Changes in Level and Horizontal Gaps
  
Also, requiring the 8 inch height would reduce the vertical travel distance for a lift....
 - 
    
  
  Commerce
  
[36.104] Travel, trade, traffic, commerce, transportation, or communication – (1) Among the several States; (2) Between any foreign country or any territory or possession and any State...
 - 
    
  
  Cross Slope: ADA Standard Section 405.3
  
Section 405.3 covers the current ADA Standards for cross slope requirements on ramps.
 - 
    
  
  11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
  
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
 - 
    
  
  1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
  
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
 - 
    
  
  11B-705.1.2.2.2.2 Two entrance/exit points
  
entrance/ exit points, as measured perpendicular to the curb, and the turning space shall provide a minimum 36 inches (914 mm) wide portion without detectable warnings to allow pedestrian travel...
 - 
    
  
  11B-809.4 Toilet facilities and bathing facilities
  
Toilet and bathing fixtures required to comply with Sections 11B-603 through 11B-610 shall be located in the same bathroom or toilet and bathing area, such that travel between fixtures does...
 - Just Manufacturing 42" Stainless Steel Grab Bar
 - Just Manufacturing 24" Stainless Steel Grab Bar
 - Just Manufacturing 36" Stainless Steel Grab Bar
 - Just Manufacturing 30" Stainless Steel Grab Bar
 - 
    
  
  6.7.1.1
  
The grade of a Beach Access Route shall be 1:20 (5 percent) or less for any distance. ...
 - 
    
  
  2.4.1.1
  
The running slope (grade) of an ORAR shall be 1:20 (5 percent) or less for any distance. ...
 - Freedom Chair at the beach
 - 
    
  
  Transfer Supports
  
Consideration must be given to the distance between the transfer system and the elevated play components it is intended to facilitate....
 - 
    
  
  Animal Containment Areas: ADA Standard Section 203.12
  
Section 203.12 covers scoping requirements of general exceptions for animal containment areas in the most current ADA Standards.