There should be a 1½ inches minimum clearance around the gripping of transfer supports as proposed by the Access Board....
Search Results "Should"
-
5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
-
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces
Transfer supports for imaging equipment should be 28 inches minimum in length and positioning supports shall be 12 to 16 inches minimum in length....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....
-
Question 18
Are there issues regarding other uses of EIT that the Department should consider adopting to ensure that EIT equipment is accessible?...
-
C1-4. Accessible Route Level Changes
Note: Level changes between 1/4 inch and 1/2 inch should be beveled. Yes _____ No _____...
-
708.2 Audible and Visual Indicators
Signs indicating the meaning of visual signals should be provided....
-
Shower Dimensions for ADA
What should be the answer as to if this can be interpreted nominal space? I would appreciate an opinion. Thank you. ...
- Steelcase Ology Series height-adjustable tables
-
SEC. 514. SEVERABILITY. 42 USC 12213
Should any provision in this Act be found to be unconstitutional by a court of law, such provision shall be severed from the remainder of the Act, and such action shall not affect the enforceability...
-
Lavatory Fixtures and Vanities
Commenters indicated that such references were redundant or inaccurate and should be removed. Response....
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed footrest to allow for a left or right transfer....
-
4.6.6 VERTICAL CLEARANCE
If accessible van parking spaces are provided, then the minimum vertical clearance should be 114 in....
-
4.1.7(2)(d)
Access should be provided to all levels of a building or facility in compliance with 4.1 whenever practical....
-
§100.7(b) Vicarious liability
A person is vicariously liable for a discriminatory housing practice by the person's agent or employee, regardless of whether the person knew or should have known of the conduct that resulted...
-
§ 35.160(a)(2)
or associate of an individual seeking access to a service, program, or activity of a public entity, who, along with such individual, is an appropriate person with whom the public entity should...
-
Clear floor space at Lav
Terry, You should identify the minimum dimensions of the clear floor space at the Lav....
-
Best Way to Use CA Inter Advanced Accounting Notes
Each revision should be quicker and more focused. 4. Should I make my own notes or use ready-made ones? Making your own notes improves understanding, but it’s time-consuming....
-
Re: Understanding Toss Prediction in Cricket
Accessibility should always be part of the design process from the beginning. Football Bros...
-
5.4.1 Transfer Support Location for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
Transfer supports should be required on both sides of the transfer surface and be movable or removable so they can be out of the way during transfer....
-
11B-708.2 Audible and visual indicators
Signs indicating the meaning of visual signals should be provided....
-
3.4 General Terminology
should. Denotes an advisory specification or recommendation....
-
Location at Marked Crossings [4.7.9]
At corners with a large radius, perpendicular curb ramps should be located so that the centerline is radial to the curb face instead of being in line with the crosswalk direction....
-
Hardware [4.25.4]
Hardware [4.25.4] Hardware should be exposed (as required for sliding doors in 4.13) and must: be automatic or operable with one hand operate without tight grasping,...