810.5.3 Platform and Vehicle Floor Coordination--Modification to 810.5.3 of Appendix D to 36 CFR Part 1191 Station platforms shall be positioned to coordinate with vehicles in accordance...
Search Results "Platform Height"
-
810.5.3 Platform and Vehicle Floor Coordination--Modification to 810.5.3 of Appendix D to 36 CFR Part 1191
-
11B-410.6 Doors and gates
Platform lifts shall have low-energy power-operated doors or gates complying with Section 11B-404.3. Doors shall remain open for 20 seconds minimum....
-
11B-410.6 Doors and gates
Platform lifts shall have low-energy power-operated doors or gates complying with Section 11B-404.3. Doors shall remain open for 20 seconds minimum....
-
Accessible Counter Height
Where only a portion of a counter is made accessible, these commenters advised that the maximum height should be 32 inches....
-
11B-237 FISHING PIERS AND PLATFORMS
[See subsections ...]
-
11B-1005 FISHING PIERS AND PLATFORMS
[See subsections ...]
-
237 and 1005 Fishing Piers and Platforms
[See subsections ...]
-
1013 Tent Pads and Tent Platforms
[See subsections ...]
-
4.3 Tent Pads and Tent Platforms
[See subsections ...]
-
1013 Tent Pads and Tent Platforms
[See subsections ...]
-
1013 Tent Pads & Tent Platforms
[See subsections ...]
-
11B-1005 Fishing piers and platforms
[See subsections ...]
-
11B-237 Fishing piers and platforms
[See subsections ...]
-
11B-237 Fishing piers and platforms
[See subsections ...]
-
11B-1005 Fishing piers and platforms
[See subsections ...]
- Varidesk LLC. Pro Desk 60™ Height-Adjustable Standing Desk
-
(4) Adjustability: Method of Measurement
The MDE NPRM proposed that the measurement of the height of the transfer surface for both diagnostic equipment used in the supine, prone, or side-lying position and diagnostic equipment...
-
Other Requirements [4.11.2]
Platform lifts must comply with all applicable state and local codes and with the ASME A17.1 Safety Code for Elevators and Escalators, Section XX (1990)....
-
6. Minimum (Low) Height Standard for Transfer Surfaces
Minimum (Low) Height Standard for Transfer Surfaces As indicated in Section 5.1.1, the MDE Advisory Committee recommends that equipment with transfer surfaces be height adjustable in...
-
11B-703.2.5 Character height
11B-703.2.5 Character height....
- Humanscale Float Height-Adjustable Table
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”. ...
-
1011.4.1 Height
The tops of picnic tables shall comply with 902.3.
-
1011.4.1 Height
The tops of picnic tables shall comply with 902.3.