As a matter of clarification, the proposed rule specified that, where doorways are provided on one side of a non-rail vehicle, an accessible circulation path must connect each...
Search Results "Bus Loading Zone"
-
T207 Circulation Paths
-
8. Add § 37.169 to read as follows
8. Add § 37.169 to read as follows:
-
T402.3 Installation and Operation
When used for boarding and alighting, ramps and bridgeplates shall be firmly attached to the non-rail vehicle to prevent displacement. Ramps and bridgeplates provided on large...
-
§ 38.159(a)(2) Exception
meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations issued by the Department of Transportation, the bus...
-
3.5.1 General
Accessible loading zones. Accessible restrooms and bathing facilities....
-
Typical Issues
Typical Issues When parking is provided for voters, staff and volunteers, accessible parking must be provided for people with disabilities. Voters with disabilities who arrive by...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
-
T403 Lifts
These provisions addressed design load, controls, manual operation, platform characteristics, gaps, threshold ramps, contrast, deflection, movement, boarding direction, standees, and handrails...
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
-
Americans with Disabilities Act (ADA) Standards for Transportation Facilities
DOT’s ADA Standards apply to facilities used by state and local governments to provide designated public transportation services, including bus stops and stations, and rail stations....
-
Requirements to Remember for ADA Compliance in Construction Projects: Transportation Facilities
The ADA Standards issued by the Department of Transportation (DOT) apply to facilities used by state and local governments to provide designated public transportation services, including bus...
-
Signage
If the route to the accessible load area is different for persons with disabilities than for other riders, there must be signage indicating the location of the accessible load area so that...
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Exterior lighting shall be provided to illuminate walking surfaces of boarding and alighting areas when the doors of non-rail vehicles are open. Where doorways have steps, the...
-
T402 Ramps and Bridgeplates
Additional research directed at evaluating design loads for ramps in buses and vans, as well as potential effects of increase in minimum design load on vehicle design or operation is needed...
-
T404 Level Boarding and Alighting
[See subsections ...]
-
Section B: Passenger Drop-Off Area
Ward:__________ Precinct:__________ Staff:________________ Date:________ Time:_________ Address:_______________________________________ Location...
-
11B-216.12 Amusement rides
In addition, where accessible unload areas also serve as accessible load areas, signs indicating the location of the accessible load and unload areas shall be provided at entries to queues...
-
11B-216.12 Amusement rides
In addition, where accessible unload areas also serve as accessible load areas, signs indicating the location of the accessible load and unload areas shall be provided at entries to queues...
-
R308.1.3 Common Requirements
R308.1.3 Common Requirements. Boarding and alighting areas and boarding platforms shall comply with R308.1.3.