One-piece seamless construction, 1" wide with beveled edges. SOAP VESSEL: 22 gauge stainless steel with exposed surfaces in architectural satin finish....
Search Results "Beveled Threshold"
-
Bradley Standard Series Vertical Recessed Soap Dispenser
-
Cal-Royal Apollo ALC Series Cylindrical Lockset
LATCH FACEPLATE -2-1/4" x 1-1/8", adjustable for flat or beveled doors 1/8" in 2", for 2-3/4" backset. Optional 2-1/4" x 1" for 2-3/8" backset....
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Building Entrance: The raised threshold at the exterior entrance exceeds 1/2 inch (1991 ADA Stds 4.13.8; 2010 ADA Stds 404.2.5)....
-
1124B
Changes in level between 1/4 inch (6.4 mm) and 1/2 inch (12.7 mm) shall be beveled with a slope no greater than one unit vertical in 2 units horizontal (50-percent slope) [see Figure 11B...
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
Vertical surface discontinuities between 6.4 mm (0.25 in) and 13 mm (0.5 in) shall be beveled with a slope not steeper than 50 percent....
-
Corbin Russwin Inc. ED5000 Series Exit Device
significantly resists pull from the exterior, thus reducing door and frame separation, preventing the door from being forced open. 900 series heavy-duty trim deters vandals with a thick 13/16" beveled...
-
2.2.6 Door Use
755 mm Closer No No Yes Resistance to open the door ≤ 2 lbf. (9 N) < 2 lbf. (9 N) 7 to 8 lbf. (31 to 36 N) Threshold...
-
HOGGAN Wireless Dynamometer ergoFET Push/Pull Force Gauge
Ergonomic and Engineering Applications Measures Push & Pull Forces from Multiple Directions 300 lb Load Capacity and Measuring Accuracy Within 1% Low and High Threshold...
-
Willoughby Industries 2260 AquaDeck Lavatory Deck Contoured Front
AquaDeck lavatory decks can be ordered with Bullnosed or Beveled front edge styles instead of standard square-eased edges and/or 31" rim heights for juvenile use (JR)....
-
Allegion Schlage CS200-Series Mechanical Locks with Tubular Interconnect
Hand information is necessary to ensure proper cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that are to be installed on reverse bevel doors....
-
Ramps M303:3.3, 3.3.1, 3.3.2
Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
2. Follow the Accessibility Standards for Play Areas
• Changes in level between ¼ inch high minimum and ½ inch high maximum shall be beveled with a slope not steeper than 1:2....
-
Open Sesame Remote Controlled Low-Voltage Door System
Occasionally, there can be issues due to wind load (for an outward opening door), pressure differential, or excessive opening/closing resistance due to the threshold and/or weatherstripping...
-
Panda S.85 All Aluminum Slim Profile Lift and Slide System
A virtually unobstructed threshold from the interior to the exterior area for a “barefoot” friendly passage. ADA Compliant Track with drainage....
-
Automatic Doors
Provisions in section 404.3 address clear width; maneuvering clearance; thresholds; doors and gates in series; operable parts; break out opening; and revolving doors, gates, and turnstiles...
-
2. Standing
"[T]hose who seek to invoke the jurisdiction of the federal courts must satisfy the threshold requirement imposed by Article III of the Constitution by alleging an actual case or controversy...
-
Executive Summary
Based on the combination of RMS data and subjective feedback from wheelchair users, we are proposing a roughness index threshold of 1.20 in/ft for any short distance segments (less than...
-
11B-106.5 Defined terms
GROUND TEMPORARY TEXT TELEPHONE TRANSFER DEVICE TRANSIENT LODGING TRANSIT BOARDING PLATFORM TRANSITION PLATE TTY UNREASONABLE HARDSHIP USE ZONE VALUATION THRESHOLD...
-
III. Background
Congress did not intend, however, for the threshold question of disability to be used as a means of excluding individuals from coverage. H.R. Rep. No. 110–730, pt. 2, at 5 (2008)....
-
Cal-Royal Pioneer SL / CSL Series Cylindrical Lockset
LATCH FACEPLATE -2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
LATCH FACEPLATE - 2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1 1/8" for 2 3/8" backset....
-
Kawneer North America AA™250/425 Thermal Entrances
At the bottom of the door, the combination of a thermally broken threshold and dual bottom door sweeps minimizes air infiltration....
-
HOGGAN Wireless Dynamometer ergoFET500 Heavy Push/Pull Force Gauge
With two operating test modes, four selectable threshold settings, and force readings in pounds (lbs), kilogram-force (kgf), or Newtons (N), the ergoFET500 is a highly versatile force gauge...
-
3. Exception to Ramp Running Slope
., thresholds to be steeper than 1:8....
