Additional space for maneuvering and a wider door will be needed where a side opening is centered on the ride....
Search Results "Door Surface"
-
11B-1002.4.4.2 Side entry
-
11B-1002.4.4.2 Side entry
Additional space for maneuvering and a wider door will be needed where a side opening is centered on the ride....
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Hallways & Corridors: The interior door cannot be opened with 5 pounds of force or less (1991 ADA Stds 4.13.11; 2010 ADA Stds 404.2.9)....
-
11B-604.3.2 Overlap
When the door to the toilet room is placed directly in front of the water closet, the water closet cannot overlap the required maneuvering clearance for the door inside the room. ◼ ...
-
11B-604.3.2 Overlap
When the door to the toilet room is placed directly in front of the water closet, the water closet cannot overlap the required maneuvering clearance for the door inside the room. ◼ ...
-
Library
Offset pivot hinge on door to library Large print books in the library Handrails at two height Evaporative cooler to save the energy used by air conditioners...
-
§ 38.101(a)
(a) Any stepwell or doorway with a lift, ramp or bridge plate shall have, when the door is open, at least 2 footcandles of illumination measured on the step tread, ramp, bridge plate, or...
-
Mockett PCS46/ALM Recessed Aluminum Grommet with 6 Power & 4 Data
PCS46/ALM lies flush with table surface and provides 6 power outlets rated 15A/125VAC and 4 Category 5e data connections. Additional insert options available here....
-
Vertical Clearance [§307.4]
Vertical Clearance [§307.4] Headroom clearance of at least 80” high is required along all circulation paths (except at doors and doorways where a 78” minimum clearance is permitted to...
-
§ 38.57(b)
Particular attention shall be given to ensuring maximum maneuverability immediately inside doors. Ample vertical stanchions from ceiling to seat-back rails shall be provided....
-
Test Procedures
Accessibility and Durability Measures The beach path surfaces were periodically measured with a rotational penetrometer....
-
Klingstone 400
) and a very small amount of loose fines coming to the surface....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
106.5.64 Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
Visual Alarms
Result: People who are deaf or hard of hearing cannot hear fire alarms, ringing telephones, knocking at doors or ringing doorbells....
-
Access to Independence of Cortland County, Inc. (ATI) - Cortland, NY
Mission Access to Independence empowers people with disabilities to lead independent lives in their community and strives to open doors to full participation and access for all....
-
DEFENDANTS’ RAISED PORCHES
At each of the 249 stores in question, two public entrances with doors that are not part of the porch flank the raised porch. ...
-
A. Accessible Voting Program
facilities and equipment (including, but not limited to, permanent equipment such as lifts and elevators, and temporary equipment such as portable ramps, traffic cones, signs, wedges, and door...
-
STORY
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
Ramp
Ramp: A ramped surface was designed to insert between two steps and serve as an integrated sliding board to assist with the transfers by bridging the gap between steps. ...
-
Why test on straight courses and P-shaped turning courses?
However, the cost for producing these course designs with a number of surface materials would be very large....
