Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 1017.4 at intervals of 1000 feet (300 m) maximum....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Commonly Searched Documents
-
1017.4 Passing Spaces
-
10 - foot straightedge method
When used as a specification or requirement, a maximum deviation in length under the straightedge is given, such as "no point shall exceed 1/4 inch under a 10 - foot straightedge."...
-
11B-703.7.2.6.3 Unisex toilet and bathing facilities
The vertices of the triangle symbol shall be located 1/4 inch (6.4 mm) maximum from the edge of the circle symbol with a vertex pointing upward....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-404.2.11 Vision lights
adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1092 mm) maximum...
-
11B-404.2.3 Clear width
In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
11B-404.2.11 Vision lights
adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1092 mm) maximum...
-
11B-809.10.6.1 Size
A water closet shall be permitted to project 12 inches (305 mm) maximum into the opening provided that 36 inches (914 mm) minimum clear space is maintained between the water closet and the...
-
4.3.4 Knee and Toe Clearances
But, in designing a desk for filling out a job application, there is no technical reason for restricting the depth of toe clearance but the leading edge of the desk should be as close to...
- Midmark Ritter 222 Barrier-Free® Power Examination Table
- Salsbury Industries See Through Metal Locker Double Tier 3 Wide
- Spectrum Aquatics Aspen Pool Lift
- Salsbury Industries See Through Metal Locker Double Tier 1 Wide
- Oval Window Audio Induction Loop Receivers for Individuals without Telecoil-Equipped Hearing Aids
- Cavity Sliders USA Inc. FH Ceiling Mount Track
- Salsbury Industries See Through Metal Locker Triple Tier 3 Wide
- Salsbury Industries See Through Metal Locker Triple Tier 1 Wide
- Pilot Rock CN-AMQ Amherst Collection Square Ash Receptacles
- Mobi-Mat® Recpath™ ADA Beach Access Mat
- Atlantis Railing
- Trimco 1500 Series Hospital Latch
-
c. Transfer Surface Size for Diagnostic Equipment Used by Patients in the Supine, Prone, or Side-lying Position
The MDE Advisory Committee also recommended the addition of an exception for imaging equipment transfer surface size; to allow a decrease in depth to no less than 21 inches where it is technically...