design solutions are not feasible; or work that would impact load-bearing walls and other essential components of the structural frame, including structural reinforcement of the floor...
Search Results "Floor Destination Indicator"
-
Technical Infeasibility
-
Signage
are provided for all permanent rooms and spaces in the lodging facility must be mounted on the wall (not the door) adjacent to the latch side of the door and centered 60 inches above the floor...
-
E. Restaurants and Concessions:
PSE shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned...
-
Location
Van-accessible parking spaces located in parking garages may be clustered on one floor (to accommodate the 98-inch minimum vertical height requirement)....
-
§ 38.77(c)
Vertical stanchions from ceiling to floor shall not interfere with wheelchair or mobility aid circulation and shall be kept to a minimum in the vicinity of accessible doors....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
106.5.45 Primary Function
containing a primary function include, but are not limited to: (i) Remodeling merchandise display areas or employee work areas in a department store; (ii) Replacing an inaccessible floor...
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
DOJ/DOT Joint Technical Assistance on the Title II of the ADA Requirements to Provide Curb Ramps when Streets, Roads, or Highways are Altered through Resurfacing
Otherwise, these individuals are forced to travel in streets and roadways and are put in danger or are prevented from reaching their destination; some people with disabilities may simply...
-
8.4 Improving Data Sources and Research
as it relates to how environmental factors such as height and gap distances, use of handholds, surface softness, number of transfers needed to go from the initial location to the final destination...
-
Section 36.406(c) Places of Lodging (Section-by-Section Analysis)
These hybrid facilities have become increasingly popular since the ADA's enactment in 1990 and make up the majority of new hotel construction in some vacation destinations. ...
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
Panda TS.19 Thermally Broken Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
Summary of Major Provisions
The final rule adds new technical requirements for floor surfaces, bedrooms, and weather alert systems in emergency transportable housing units with mobility features....
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
-
Test Procedures
The procedures are based on a draft national standard test method for the firmness and stability of ground and floor surfaces (RESNA 2000), which uses an average of five readings....
-
1.0 APPLICATION
Where existing individual site furnishings are altered or replaced, the floor or ground surface under or around them is not required to be altered solely because an accessible furnishing...
-
D. Reasonable Modifications
However, some people have disability-related needs for cots to be modified or may need to sleep on cots or beds instead of on mats placed on the floor....
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
