Sections 239.2 and 1007.3 of the 2010 Standards require at least fifty percent (50%) of golf holes on miniature golf courses to be accessible, including providing a clear floor or ground...
Search Results "Applicable Standard"
Filters
Commonly Searched Documents
-
Accessible Miniature Golf Course Holes
-
6.11
6.11 Nothing in Section 6 of the Consent Order shall limit the placement of any additional wheelchair spaces required by state or local codes beyond those mandated under the ADA Standard...
-
12101(a)(5)
architectural, transportation, and communication barriers, overprotective rules and policies, failure to make modifications to existing facilities and practices, exclusionary qualification standards...
-
a. Federal Laws
This defense is not valid, however, if the Federal standard does not require the discriminatory action, or if there is a way that an employer can comply with both legal requirements....
-
243 Shooting Facilities with Firing Positions
243 Shooting Facilities with Firing Positions Sections 243 and 1010 of the 2010 Standards require an accessible turning space for each different type of firing position at a shooting...
-
Use Zone
Use Zone - The ground level area beneath and immediately adjacent to a play structure or piece of equipment that is designated by ASTM F 1487 Standard Consumer Safety Performance Specification...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second contingency, proposed § 36.302(f)(6)(ii), a facility could release unsold accessible seating in a specific seating area if all of the standard seats in that location were...
-
401.1 Scope
ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other chapter of the Revised 508 Standards...
-
Accessible Lodging Factsheet
Many of these revisions apply to Places of Lodging such as new requirements for reservation systems, and revised and new standards for facility access [28 C.F.R. §§ 36.104, 36.302(e), 36.406...
-
C.4 - Are subcontractors subject to Section 508?
., EIT that meets the Access Board's standards)....
-
M14
[ADA Standards §§ 4.23.7; 4.27.3; 4.2.5 and Fig. 5; 4.2.6 and Fig. 6] Yes No...
-
B3
[ADA Standards § § 4.1.2(5), A4.6] Yes No...
-
§ 37.42(b)
intercity, or high-speed rail lines or systems, in which no track passing through the station and adjacent to platforms is shared with existing freight rail operations, the performance standard...
-
12183(a)(1)
and usable by individuals with disabilities, except where an entity can demonstrate that it is structurally impracticable to meet the requirements of such subsection in accordance with standards...
-
402.3.1 Private Listening (Section-by-Section Analysis)
This proposed requirement would be new to the 508 Standards....
-
302.4 Without Hearing (Section-by-Section Analysis)
This provision would clarify the requirements in existing 508 Standards §1194.31(c) and existing 255 Guidelines §1193.41(d) by specifying that provision of a mode of operation without hearing...
-
4.1.3(14)
Emergency warning systems in medical care facilities may be modified to suit standard health care alarm design practice....
-
A4.16.3 Height
Thick seats and filler rings are available to adapt standard fixtures to these requirements....
-
A4.16.3 HEIGHT
Thick seats and filler rings are available to adapt standard fixtures to these requirements....
-
A4.2.3 WHEELCHAIR TURNING SPACE
This standard specifies a minimum space of 60 in (1525 mm) diameter for a pivoting 180-degree turn of a wheelchair....
-
4.34.5.5(1) Size and clearances
The shower stall in Fig. 35(b) will fit into the same space as a standard 60 in (1525 mm) long bathtub....
-
Electric Vehicle Charging Stations
The Standards do not include specific provisions for electric vehicle (EV) charging stations. ...
-
Protruding Objects [§204]
Protruding Objects [§204] To prevent hazards to people with vision impairments, the standards limit the projection of objects into circulation paths....
-
11B-407.2.1.6 Keypads
Where keypads are provided, keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....