The Access Board's standards for EIT became effective February 20, 2001 and apply to EIT that is developed, procured, maintained or used by the Federal government, whether conducted in house...
Search Results "Applicable Standard"
Commonly Searched Documents
-
H.3 - If an agency began work on EIT prior to June 21, 2001 that will be developed entirely in-house, but won't be completed until after June 21, 2001, does this EIT have to meet the 508 requirements?
-
302.1 Without Vision (Section-by-Section Analysis)
This provision would clarify the requirements in existing 508 Standards §1194.31(a) and 255 Guidelines §1193.41(a) by specifying that provision of a mode of operation without vision is required...
-
207.2 Platform Lifts
1003.2.13.4 of the International Building Code (2000 edition and 2001 Supplement) or section 1007.5 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards...
-
401.1 Scope
apply to ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other chapter of the 508 Standards...
-
2.1 AUTHORITY
These standards were jointly developed by the General Services Administration, the Department of Housing and Urban Development, the Department of Defense, and the United States Postal Service...
-
FAQ: What does Corada mean?
We have input federal ADA standards and regulations and connected access-related content, such as technical assistance, products and services, how-to videos, CAD/BIM files, design ideas,...
-
§1193.37 Information pass through.
Telecommunications equipment and customer premises equipment shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information...
-
11B-503.3.3 Marking
[2010 ADA Standards] 503.3.3 Marking. Access aisles shall be marked so as to discourage parking in them....
-
DOT Response
The Department continues to believe that standards based on Access Board guidelines for transportation vehicles are the appropriate basis for requirements pertaining to the design and construction...
- PEMKO 5" Heavy Duty Threshold No. 2715
-
1115B.4.1, Item 1
was more narrowly restricted, but for water closets permitted and/or installed between August 1, 2012 and January 1, 2014 (effective date of the 2013 CBC), the following Safe Harbor is applicable...
-
§35.130(b)(8) (Section-by-Section Analysis)
Paragraph (b)(8), a new paragraph not contained in the proposed rule, prohibits the imposition or application of eligibility criteria that screen out or tend to screen out an individual...
-
DSA IR 11B-6 MECHANICAL ONLY PROJECTS EXEMPT FROM ACCESSIBILITY REVIEW (with revisions issued through Jan. 2011)
This IR indicates an acceptable method for achieving compliance with applicable codes and regulations, although other methods proposed by design professionals may be considered by DSA....
-
Appendix A National Trails Surface Study Participating Stabilizer Companies
screenings Mix with soil 4 inches deep Soiltac Soilworks Soiltac Liquid Mix-in Soiltac Powder Mix-in Vinyl Acetate Copolymer Moderate application...
-
III−1.1000 General
Title III of the ADA covers -- 1) Places of public accommodation; 2) Commercial facilities; and 3) Examinations and courses related to applications, licensing, certification, or...
-
Use Zone
The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see "Referenced Standards" in Chapter...
-
§ 36.303(g)(4)(ii)
section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table 219.3 of the 2010 Standards...
-
At what types of property/sites must the ADA requirements be met?
Also, under the American with Disabilities Act there is a general obligation to provide accessible EVCS; however, specific requirements for EVCS have not been adopted in the ADA Standards...
-
Section 2. Building entrance on an accessible route
A building entrance that complies with ANSI A117.1-1986 (see Section 5, Requirement 1 of these guidelines) or a comparable standard complies with the requirements of this paragraph....
-
D1
[ADA Standards § 4.1.3(1)] Yes No Notes: If this entrance is not the main entrance, it needs to be kept unlocked when other shelter entrances are unlocked....
-
Bus boarding and alighting areas
(DOT ADA Standard 810.2.)...
-
H12
[ADA Standards §§ 4.23.7; 4.27.2; 4.2.5 and Fig 5; 4.2.6 and Fig 6] Yes No...
-
§ 36.303(g)(4)(ii)
section by using the existing assistive listening receivers that the public accommodation is already required to provide at its movie theaters in accordance with Table 219.3 of the 2010 Standards...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
The standards specify a maximum height (27”) for the leading edge of barriers so they are within cane sweep, but a minimum height is not specified....