A continuous mirror, which extends to the edge of the washbasin, is not only suitable for seated users but also for those standing....
Search Results "Extended Floor Surface"
Filters
Commonly Searched Documents
-
HEWI System 800 Adjustable Mirror
-
Speakman Commander Single Lever Kitchen Faucet S-3762
The spout extended 9 In. from the center of mounting holes. The S-3762 is certified to meet ASME A112/18/1/CSA B125.1, CA AB 1953 and NSF 61 standards....
-
Bobrick ClassicSeries Semi-Recessed Convertible Paper Towel Dispenser/Waste Receptacle B-3942
Receptacle is 8" (205mm) deep with capacity of 12‑gal. (45.5‑L); extends 4 1/8" (105mm) from wall. Rough Wall Opening: 16" W, 54 3/4" H, 2" min. depth (405 x 1390 x 50mm)....
-
HEWI System Lever Door Handle Product Range 211
The lever effect of the version with an extended gripping area minimises the effort required to open and close a door....
-
Garaventa Evacu-Trac's Brake Can Stop it on the Stairway
The Evacu-Trac is completely stable and self-supporting on flat surfaces and during descent. For more information see our web site at www.evacutrac.com...
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
404.2.3 Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
404.2.3 Doorways - Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
404.2.3 Doorways - Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
10 - foot straightedge method
10 - foot straightedge method This is the classic method for determining the flatness of concrete and other types of finished floors....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
4. Desk with knee and toe space
Desk with knee and toe space and clear floor space for front approach....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
Modifications to the Longitudinal Study
By the end of 2006, NCA had initial commitments from a number of state or federal outdoor recreation entities to provide test sites for the trail surface study, however, the down turn in...
-
TTYs: ADA Standard Section 217.4
Section 217.4 covers scoping requirements in the current ADA Standards for TTYs.
-
11B-233.3.4.3 Alterations to residential dwelling units with adaptable features
Exception: Where any portion of a building’s exterior is preserved, but the interior of the building is removed, including all structural portions of floors and ceilings and a new building...
-
11B-1007.2 Accessible routes
Accessible routes located on playing surfaces of miniature golf holes shall be permitted to use the exceptions in Section 11B-1007.2. Exceptions: 1. ...
-
Typical Issues
In order to be usable, the access aisle must be relatively level, clear of gravel or mud, and the surface must be in good condition without wide cracks or broken pavement....
-
11B-1007.2 Accessible routes
Accessible routes located on playing surfaces of miniature golf holes shall be permitted to use the exceptions in Section 11B-1007.2. Exceptions: 1....
-
11B-1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
BOAT LAUNCH RAMP
[DSA-AC] A sloped surface designed for launching and retrieving trailered boats and other water craft to and from a body of water....
