ICT in the form of wireless handsets shall conform to ANSI/IEEE C63.19-2011 (incorporated by reference in Chapter 1)....
Search Results "9-1-1 Service"
-
410.4.1 Wireless Handsets
-
4.8.6 Cross Slope and Surfaces
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
4.8.6 CROSS SLOPE AND SURFACES
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
SIGN
[HCD 1-AC, DSA-AC] An element composed of displayed textual, verbal, symbolic, tactile, and/or pictorial information....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
I. INTRODUCTION
All across America, towns and communities are taking steps to make their programs and services accessible....
-
III. DEFINITIONS
The term “Auxiliary Aids and Services” includes qualified interpreters provided either on-site or through video remote interpreting (“VRI”) services; note takers; real-time computer-aided...
-
BACKGROUND
Part 35, which require that no qualified individual with a disability, by reason of such disability, be excluded from participation in or be denied the benefits of the services, programs...
-
Section 37.141 Requirements If a Joint Plan is Submitted
At a minimum, this document must include the following: (1) A general statement that the participating entities intend to file a joint coordinated plan; (2) A certification from each...
-
§382.43(c)(2)
use carrier Web sites to research or book air transportation in order to obtain their feedback on the Web site's accessibility and usability before the dates specified in paragraph (c)(1)...
-
11B-213.3.2 Water closets
When the July 1, 2015 Supplement to the 2013 CBC was issued, this scoping was increased, thereby exceeding the 2010 ADAS scoping....
-
502.4 Floor or Ground Surfaces
EXCEPTION: Slopes not steeper than 1:48 shall be permitted. Advisory 502.4 Floor or Ground Surfaces....
-
Accessible Routes Adjacent to the Playing Surface
The accessible route provisions in ADAAG address slope (maximum of 1:12 or 8.33%), width (minimum of 36 inches), cross slope (maximum of 1:50 or 2%), handrails, and changes in level....
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Where doorways have steps, the illumination shall be 1 foot-candle (11 lux) minimum for a distance of 3 feet (915 mm) measured beyond the outside edge of the doorway or bottom step tread...
-
§ 382.43(c)(2)
use carrier Web sites to research or book air transportation in order to obtain their feedback on the Web site's accessibility and usability before the dates specified in paragraph (c)(1)...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....