(f) For vehicles in excess of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches....
Search Results "Vehicle Hand Control"
-
§ 38.29(f)
-
§ 38.23(c)(3) Ramp threshold
The transition from roadway or sidewalk and the transition from vehicle floor to the ramp may be vertical without edge treatment up to 1/4 inch....
-
11B-407.4.7.1.1 Type
Control buttons shall be identified by raised characters or symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-407.4.7.1.1 Type
Control buttons shall be identified by raised characters or symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3...
-
11B-407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3...
-
503.4.2 Audio Description Controls
Where user controls are provided for program selection, ICT shall provide user controls for the selection of audio descriptions at the same menu level as the user controls for volume or...
-
503.4.2 Audio Description Controls
Where user controls are provided for program selection, ICT shall provide user controls for the selection of audio description at the same menu level as the user controls for volume or program...
-
Volume Controls
Does the accessible phone have volume controls? Yes __ No __ N/A __ Comments: ___________________________________________ c....
-
§ 38.23(b)(2)(ii) Exception
Where the lift is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary lift”), the requirements...
-
§ 38.25(c) Door height
For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift platform, or highest point of a ramp, shall be a minimum of 68...
- Bradley Aerix+ High Speed, Stainless Steel Vertical Dual-Sided Hand Dryer
- Sloan Optima® EHD-401 Sensor Activated Hand Dryer for Surface Mounting
-
Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People
Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People [sic]...
-
413.1.2 Audio Description Controls
ICT shall provide user controls for the selection of audio description in at least one location that is comparable in prominence to the location of the user controls for program selection...
-
Operable Parts: ADA Standard Section 410.5
Section 410.5 covers the current ADA Standards for operable parts of the platform lift controls.
-
If the lift manufacturer specifies that wheelchairs must face away from the vehicle when using the lift, are transportation operators required to permit passengers to board facing the vehicle?
If the lift manufacturer specifies that wheelchairs must face away from the vehicle when using the lift, are transportation operators required to permit passengers to board facing the vehicle...
-
§ 38.23(a) General
All vehicles covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances...
-
11B-410.5 Operable parts
Controls for platform lifts shall comply with Section 11B-309....
-
11B-410.5 Operable parts
Controls for platform lifts shall comply with Section 11B-309....
-
11B-205 Operable parts
[See subsections ...]
-
11B-309 Operable parts
[See subsections ...]
-
Operable Parts: ADA Standard Section 205
Section 205 covers scoping requirements for operable parts in the most current ADA Standards.
-
11B-411.4.7.4 Button spacing
Button spacing shall comply with Section 11B-407.4.7.1.5.