Characteristics that limit functionality or prevent a user from attaching or installing assistive technology....
Search Results "Military Installation"
-
Closed Functionality
-
903.3.1 Standards
Sprinkler systems shall be designed and installed in accordance with Sections 903.3.1.1, 903.3.1.2 or 903.3.1.3....
-
§ 36.304(b)(19)
(19) Installing an accessible paper cup dispenser at an existing inaccessible water fountain;...
-
Sec.36.304(b)(19)
(19) Installing an accessible paper cup dispenser at an existing inaccessible water fountain;...
-
Can handrails be mounted to guard rails?
Yes, handrails can be installed on guard rails if all applicable requirements are met....
-
Can handrails be attached to guard rails?
Yes, handrails can be installed on guard rails if all applicable requirements are met....
-
607.4.2.1 Back Wall
Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub...
-
3.2 Physical Accessibility Barriers and Solutions
Install permanent, accessible (tactile) signs Locks on the lockers are not accessible Locks on the lockers are not accessible Install accessible locks on all lockers...
-
11B-607.4.2.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
SUMMARY
Careful evaluation of every pedestrian signal installation is needed to assure that it meets the goals of providing accurate and helpful information to pedestrians who have vision impairments...
-
Issue 7: Repair/replacement (put it back right!)
When the APS is not correctly installed, there is a risk that a person who is blind will cross a street with the wrong WALK indication or in the wrong direction....
-
TTYs: ADA Standard Section 217.4
Section 217.4 covers scoping requirements in the current ADA Standards for TTYs.
-
Height: ADA Standard Section 606.3
Section 606.3 covers the current ADA Standards for the height of lavatories and sinks.
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-234.1 General
With respect to amusement rides purchased from other entities, new refers to the first permanent installation of the ride, whether it is used off the shelf or modified before it is installed...
-
11B-234.1 General
With respect to amusement rides purchased from other entities, new refers to the first permanent installation of the ride, whether it is used off the shelf or modified before it is installed...
-
Big John Toilet Support & Short Swivel Support 7.5" to 14" Installation Video
The Big John Toilet Seat Support is the secure solution for supporting wall mounted toilets. The Big John Toilet Support mounts underneath the toilet bowl working in conjunction...
-
1007.5.1 Openness
Platform lifts on an accessible means of egress shall not be installed in a fully enclosed hoistway....
-
903.7 Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
903.7 Wet Locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....