However, the requirement for at least one TTY on an exterior site cannot be met by installing a TTY in a bank inside a building....
Search Results "Military Installation"
-
11B-217.4 TTYs
-
907.5.2.3.4 Groups R-2.1, R-3.1 and R-4
Protective social care facilities which house persons who are hearing impaired, shall be provided with notification appliances for the hearing impaired installed in accordance with NFPA...
-
Unobstructed: ADA Standard Section 308.3.1
Section 308.3.1 covers the current ADA Standards for unobstructed side reach.
-
11B-221.2.4 Temporary structures
Readily removable seats should be designed to facilitate easy, timely and frequent removal and installation....
-
11B-221.2.4 Temporary structures
Readily removable seats should be designed to facilitate easy, timely and frequent removal and installation....
-
§ 35.151(b)(4)(iii)(B)(1)
., the cost of widening doorways or installing ramps;...
-
§ 36.403(f)(2)(i)
(i) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
Sec.36.403(f)(2)(i)
(i) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
11B-607.4.2.2 Control end wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
10.2.2(2)
(2) When new bus route identification signs are installed or old signs are replaced, they shall comply with the requirements of 10.2.1(3)....
-
Height
The models were installed at 39 inches above finished floor to the base....
-
§ 35.151(b)(4)(iii)(B)(1)
(1) Costs associated with providing an accessible entrance and an accessible route to the altered area, for example, the cost of widening doorways or installing ramps;...
-
11B-607.4.2.3 Head end wall
A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...
-
11B-607.4.2.2 Control end wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
11B-607.4.1.2 Control end wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
607.4.2.3 Head End Wall
A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub....
-
607.4.2.2 Control End Wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
607.4.1.2 Control End Wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
1007.2.1 Elevators required
In buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with...
-
Wading pools. (Section-by-Section Analysis)
The Department is concerned that installing a sloped entry in existing wading pools may not be feasible for a significant proportion of public entities and is considering creating an exemption...
-
Can access be provided after construction based on need?
required to be built with certain specifically enumerated access features, such as grab bars and lavatory clearances, if they are built according to criteria that will facilitate later installation...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...