Floor or ground surfaces of a clear floor or ground space shall comply with Section 11B-302....
Search Results "Gripping Surface"
-
11B-305.2 Floor or ground surfaces
-
R302.7 Surfaces
R302.7 Surfaces....
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
11B-403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
A4.5.1 General
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....
-
Access Board: Door and Gate Surfaces
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Better Recreation Surfaces
Better recreation surfaces for playgrounds and trails. Best playground surface. Best trail surface. Nature playgrounds. Nature trails....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
About this Study
It included laboratory testing of energy absorption and surface firmness on trial surfaces in plywood boxes 0.5 m x 0.5 m (18” x 18”) at a uniform depth of 0.3 m (12”)....
-
5. Compare Surface Options
Decision-makers should dialogue with the surface supplier regarding realistic, objective measurements to evaluate surface performance and maintain the surface material over the life span...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
-
TechniSoil G3® Pathway Liquid Polymer Stabilizer
This eco-friendly liquid polymer stabilizer for decomposed granite (DG) and crushed stone materials yields a durable, dust-free surface in only a few basic steps....
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded edges per...
-
Handrails Requirement
The handrail requirements in section 505 address specifications for continuity, height, clearance, gripping surface, cross section, fittings, and extensions....
-
Unity Surfacing Systems Pave-Land 1 1/2" and 1 3/4" thick Interlocking Tiles
Hard surfaces such as, concrete (cement) and blacktop (asphalt) are very unsafe for anyone, which increases the likelihood of leg fatigue and injury....
-
Test Courses & Surfaces
Test Courses & Surfaces Test courses were designed and built using nine different types of exterior surfaces (Table 1)....
