...
Search Results "Fire-Building Surface"
-
[F] 907.5 Occupant notification systems
-
11B-215 FIRE ALARM SYSTEMS AND CARBON MONOXIDE ALARM SYSTEMS
[See subsections ...]
-
11B-215 Fire alarm systems and carbon monoxide alarm systems.
[See subsections ...]
-
Visual Alarms
Visual Alarms • Where audible fire alarms or emergency notification is provided, flashing lights are required in public and common use areas, including toilet and bath rooms, locker rooms...
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
Surface discontinuities
Differences in level between two adjacent surfaces. Elevation changes due to ramps or stairs do not, themselves, constitute surface discontinuities....
-
4.2.8 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage....
-
5.3.2.2 Surface
The surface of the turning space and clear floor or ground space shall be firm and stable....
-
1012.4 Surface
This section requires the surface of parking spaces and pull-up spaces to be firm and stable....
-
R409.8 Surfaces
R409.8 Surfaces. Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
T402.5 Surfaces
Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate....
-
TechniSoil G3® Pathway Stabilizer Video
Requires the Registered User plan or above. Login! -
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
Unitary Surface
Unitary Surfaces. The predominant surface characteristic is whole. ...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
floor to have a smooth surface on the push side....
-
902 Dining Surfaces and Work Surfaces
902 Dining Surfaces and Work Surfaces...
-
226 Dining Surfaces and Work Surfaces
226 Dining Surfaces and Work Surfaces...
-
11.2 Q. Under the individual building test, at what point of the planned entrance is the measurement taken?
On a horizontal plane, the center of each individual doorway should be the point of measurement when measuring to an arrival point, whether the doorway is an entrance door to the building...
-
F202.6.5.4 Dining Surfaces and Work Surfaces
Dining surfaces and work surfaces shall comply with F226....
-
PRIVATE BUILDING OR FACILITY
PRIVATE BUILDING OR FACILITY. [DSA-AC] A place of public accommodation or a commercial building or facility subject to Chapter 1, Section 1.9.1.2....
-
11B-217.4.3.2 Private buildings
Where four or more public pay telephones are provided in a private building, at least one public TTY shall be provided in the building....
-
11B-217.4.3.2 Private buildings
Where four or more public pay telephones are provided in a private building, at least one public TTY shall be provided in the building....