The two-way communication system shall include both audible and visible signals....
Search Results "Door Signal Device"
-
1003.2.13.5.3 Two-way communication
-
11B-604.8.1.2 Doors
11B-604.8.1.2 Doors....
-
11B-604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404 except that if the approach is from the push side of the compartment door, clearance between the door...
-
11B-604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404 except that if the approach is from the push side of the compartment door, clearance between the door...
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices
[2010 ADA Standards] 220 Automatic Teller Machines and Fare Machines ETA Editor’s Note The CBC includes point-of-sale devices. Therefore, the CBC is more inclusive....
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices
[2010 ADA Standards] 220 Automatic Teller Machines and Fare Machines ETA Editor’s Note The CBC includes point-of-sale devices. Therefore, the CBC is more inclusive....
-
You must allow a passenger with a disability to stow assistive device inside the cabin
You must allow a passenger with a disability to stow his or her cane or other assistive device inside the cabin of the aircraft close to his or her seat if it fits, consistent with...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-411.3.5 Width
The width of elevator doors shall comply with Table 11B-407.4.1....
-
11B-411.3.5 Width
The width of elevator doors shall comply with Table 11B-407.4.1....
-
Doors in a Series
A few commenters expressed concern that the Guidelines did not provide design for an entrance that consists of a series of more than one door....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
No, compliance is not required on both sides of those doors or gates that can be used in one direction only. Compliance is required only on the usable side....
-
1991 / 1994 ADA Standards - Plan Review Tool - Doors
1991 / 1994 ADA Standards - Plan Review Tool - Doors Click here to view/download the pdf, Page 1 of 2 (256 KB) Click here to view/download the pdf, Page 2 of 2 (272 KB) * * * *...
-
11B-707.1 General
Automatic teller machines, fare machines and point-of-sale devices shall comply with Section 11B-707. [2010 ADA Standards] 707.1 General....
-
11B-707.1 General
Automatic teller machines, fare machines and point-of-sale devices shall comply with Section 11B-707. [2010 ADA Standards] 707.1 General....
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
Doors at Entrances to Businesses
Doors at Entrances to Businesses Most entrances to stores and businesses use 36 inch wide doors that are wide enough to be accessible....
-
Wheelchairs and Other Power-Driven Mobility Devices
Wheelchairs and Other Power-Driven Mobility Devices Allowing mobility devices into a facility is another type of “reasonable modification” necessary to accommodate people who have disabilities...
-
Door Hardware [4.13.9]
Door Hardware [4.13.9] Hardware used to operate doors, including handles, pulls, latches and locks, must have a shape that is "easy to grasp with one hand" and does not require tight...
-
1010.1.6 Thresholds
or landing for other doors....