Aisles shall comply with Section 11B-403.
Search Results "Clear Width at Turn"
-
11B-904.3.1 Aisle
-
1018.2 Aisles in assembly spaces
Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1029. [DSA-AC] In addition to the requirements of this section, means of...
-
SECTION 1018 AISLES
[See subsections ...]
-
1018.2 Aisles in assembly spaces
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
11B-904.3.1 Aisle
Aisles shall comply with Section 11B-403.
-
11B-304.4 Door swing
Doors shall be permitted to swing into turning spaces....
-
11B-304.4 Door swing
Doors shall be permitted to swing into turning spaces....
-
Clear Width [§405.5]
Clear Width [§405.5] Ramp runs must have a clear width of 36” minimum (measured between handrails where provided)....
-
Clear Floor Space: ADA Standard Section 1004.1
Clear floor or ground spaces required at exercise machines and equipment shall be permitted to overlap. Advisory 1004.1 Clear Floor Space....
-
B) Accessible Route
The width of an accessible route can be as narrow as 32 inches wide, such as at a doorway or a narrow section of hallway, but only for a distance up to 24 inches long....
-
Shelves and Maneuvering Space
If a 180 degree turn is needed to exit an area, then a 60 inch diameter turning space or a 36 inch wide "T" is needed....
-
11B-703.8.5 Character width
The uppercase letter “O” shall be used to determine the allowable width of all low resolution VMS characters of a font....
-
11B-703.8.5 Character width
The uppercase letter “O” shall be used to determine the allowable width of all low resolution VMS characters of a font....
-
Accessible Route [9.2.2(2)]
Recommendation: ADAAG does not address furniture, but it is recommended that where dressers are provided, clear floor space should be provided so that people using wheelchairs can access...
-
R304.5.1 Width
R304.5.1 Width. The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
3.4.7 Openings
Openings in the clear ground space and turning space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter....
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided. ...
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Clear Floor or Ground Space: ADA Standard Section 1002.6.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the transfer device....
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
11B-226.4 Baby diaper changing station
Baby diaper changing stations when deployed shall not obstruct the required width of an accessible route except as allowed by Section 11B-307.2....