Uni-Door: Fabricated of #18 gauge stainless steel with a #4 satin finish and 1/2"returns to wall surface....
Search Results "Door Surface"
-
AJW Architectural Products U5704 Unidoor 2 Gallon Sanitary Napkin Disposal - Recessed
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
TABLE OF CONTENTS
and Work Surfaces 227 Sales and Service 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers 229 Windows 230 Two-Way Communication...
-
Gamco Semi-Recessed Towel Dispenser - TD-4F
Description Unit fabricated of type 304 stainless steel with exposed surfaces having a #4 satin-finish....
-
11B-705.1.1.4 Resiliency
Detectable warning surfaces shall differ from adjoining surfaces in resiliency or sound-on-cane contact....
-
405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation. Figure 405.7 Ramp Landings ...
-
Emergency Communication System
[ADA Stds. 4.10.14] Yes __ No __ N/A __ Comments: ___________________________________________ ...if the elevators have emergency communication systems behind cabinet doors, is...
-
11B-405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation....
-
11B-405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation. ◼...
-
11B-809.7 Accessible routes
The accessible route shall pass through the primary entry door, through all rooms within the dwelling unit and exterior decks and balconies....
-
What is an accessibility evaluation survey and when is one needed?
This is measured when the door is open 90 degrees for swinging doors and fully opened for other door types....
-
AJW Architectural Products U2334 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Holds 600 C-fold, 800 Multifold or 1200 Single-Fold Towels Unit features Uni-door construction...
-
AJW Architectural Products U2324 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish with 1/2" returns to wall for rigidity....
-
Check-out Aisle Counter Height
The counter surface of check-out aisle counters is required to be 38 inches high maximum. Comments from persons with disabilities considered 38 inches to be too high. Response....
-
Delimitations
following: Data from this study were obtained from a longitudinal study administered through the National Center on Accessibility (NCA) at Indiana University; One category of surface...
-
Recommendations for Further Action
are available for use on pedestrian trails and how various surface materials perform in different regions of the country....
-
Tactile Symbols: ADA Standard Section 707.6.3.2
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
Dome Size: ADA Standard Section 705.1.1
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing surface...
-
11B-707.6.3.2 Tactile symbols
Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised...
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing surface...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
