Signs required by Chapter 10, Section 1007.9 at doors to areas of refuge and exterior areas for assisted rescue shall comply with Section 11B-703.5 and include an International Symbol of...
Search Results "Door Clear Width"
Filters
Commonly Searched Documents
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
-
Dressing, Fitting, or Locker Rooms
There must be an accessible route through the door and to all elements required to be accessible in the room....
-
11B-703.7.2.6.2 Women’s toilet and bathing facilities
The circle symbol shall contrast with the door, either light on a dark background or dark on a light background....
-
New construction and alteration requirements
If you build a new facility or modify your existing one, (for example, work such as restriping the parking area, replacing the entry door or renovating the sales counter), make sure to consult...
-
Master Bedroom
Touch controls on all cabinets and doors (no knobs) Touch controls on metal lamps (master bedroom) Touch controls on automatic shades Telephone which amplifies high...
-
General Accommodations
If these areas do not have escape routes, they should have 1) an operating phone, cell-phone, TTY, and two-way radio so that emergency services can be contacted; 2) a closing door; 3) supplies...
-
2.2 Key Measurement Variables and Procedures
Door use: The level of observed effort was rated as participants used three different doors....
-
Shared Use Paths: ADA Standard Section 2.
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
The diameter or width of the gripping surfaces of a handrail or grab bar shall be 1-1/4 in to 1-1/2 in (32 mm to 38 mm), or the shape shall provide an equivalent gripping surface....
-
Seeger et al.
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
§ 38.159(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch (16 mm) in width....
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
11B-406.5.12 Detectable warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
Transfer Surface Size: Equipment Used by Patients in a Seated Position (M302.2.2)
The 21 inches minimum width is based on the ideal chair width recommended in Architectural Graphic Standards for auditorium seating....
-
306.2.3 Minimum Required Depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (430 mm) minimum under the element....
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
4.7.10 Diagonal Curb Ramps
The bottom of diagonal curb ramps shall have 48 in (1220 mm) minimum clear space as shown in Fig. 15(c) and (d)....
-
Diagonal Curb Ramps [§406.6]
Diagonal Curb Ramps [§406.6] If curb ramps are placed diagonally at an intersection, it is important that clear space 48” long min. is available at the bottom that is outside active...
-
Pay Stations
Require-ments [sic] for operable parts cover clear floor space, operating characteristics, and location within accessible reach ranges....