Require-ments [sic] for operable parts cover clear floor space, operating characteristics, and location within accessible reach ranges....
Search Results "Door Clear Width"
Commonly Searched Documents
-
Pay Stations
-
306.2.3 Minimum Required Depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (430 mm) minimum under the element....
-
Best Bath Systems ADL Spa Electronic Touch Control Series Slide-Door Bath Tub Details
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Material Characteristics (slide 6)
But now it’s hard for people to find which ones of those [glass panels] are doors....
-
1022.9 Stairway identification signs
comply with Chapter 11A, Section 1143A or Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5 shall be located at the landing of each floor level, placed adjacent to the door...
-
A. Accessible Voting Program
facilities and equipment (including, but not limited to, permanent equipment such as lifts and elevators, and temporary equipment such as portable ramps, traffic cones, signs, wedges, and door...
-
II-6.5000 Alterations to historic properties
There appears, however, to be a problem if one of the interior doors is widened, because historic decorative features on the door might be destroyed....
- ADA Now - Online Quarterly Newsletter from the ACTCP
-
R302.2 Components
Doors, doorways, and gates complying with section 404 of Appendix D to 36 CFR part 1191. Advisory R302.2 Components....
-
City of XXX – ADA Transition Plan
Facilities manager $450 Maintenance and repairs City Council room Inadequate maneuvering clearance at entrance door...
-
Exception 4
Widening doors. Installing offset hinges to widen doorways. Eliminating a turnstile or providing an alternative accessible route. Installing accessible door hardware....
-
Seating Locations
Remember, when measuring the accessible route through the space, measure the aisle width as if the chairs are pulled out and occupied....
-
Grab Bars
Grab bars must be perpendicular to the pool wall and extend the full width of the wall so a person can use them for support into the water....
-
11B-705.1.2.3 Islands or cut-through medians
Detectable warnings at pedestrian islands or cut-through medians shall be 36 inches (914 mm) minimum in depth extending the full width of the pedestrian path or cut-through less 2 inches...
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
The triangle symbol shall contrast with the door, either light on a dark background or dark on a light background....
-
11B-213.2.1 Unisex (single-use or family) toilet and unisex bathing rooms
Doors to unisex toilet rooms and unisex bathing rooms shall have privacy latches....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
The triangle symbol shall contrast with the door, either light on a dark background or dark on a light background....
-
R309.5.2 Displays and Information
Displays and information shall be visible from a point located 1.0 m (3.3 ft) maximum above the center of the clear space in front of the parking meter or parking pay station....
-
Passing Spaces [1017.4]
A trail tread width less than 60 inches does not permit two people using mobility devices to pass each other....
-
Perpendicular Curb Ramps (R304.2) (Section-by-Section Analysis)
The turning space must be 1.2 meters (4 feet) minimum by 1.2 meters (4 feet) minimum, and is permitted to overlap other turning spaces and clear spaces....
-
§382.55(b)(2)
subject a passenger with a disability to special screening procedures because the person is traveling with a mobility aid or other assistive device if the person using the aid or device clears...
-
Grab Bar Height
Commenters pointed out the proposed rule was not clear on whether the height of grab bars was to be measured to the top or to the centerline. Response....
-
Shower Dimensions for ADA
We would like to confirm this can be interpreted as a nominal dimension rather than a required clear space....