It is not acceptable to require people with disabilities to leave the building to reach another floor....
Search Results "Floor Slope"
-
How can existing buildings be retrofitted to make them accessible?
-
T504 Fare Collection Devices
., operable parts cannot be located higher than 48 inches above the vehicle floor), would require fare collection devices to be mounted higher than the industry norm of 45 inches....
-
220 Automatic Teller Machines and Fare Machines
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor and shall...
-
Alternative Designs
In addition, the fixture is also taller than most average bathtubs (24" above the finished floor) which permits immersion in the water even when using its fold-down seat....
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
- Willoughby Industries WBL-2320 Ligature-resistant Behavioral Healthcare Lavatory System
-
II-5.1000 General
Civil suits are routinely heard in a courtroom on the second floor of the courthouse. The courthouse has no elevator or other means of access to the second floor....
- Halsey Taylor Cane Touch Apron for HAC ADA Series
- Willoughby Industries WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for Deck Mounted Faucets
- Willoughby Industries WAF-440 AquaFount® Four Station Solid Surface Washfountain
- Willoughby Industries WAW-2311-DMF AquaWave® Single Station Solid Surface Lavatory System Deck Mounted Faucet
- Willoughby Industries WAW-2322-DMF AquaWave® Two Station Solid Surface Lavatory System for Deck Mounted Faucets
-
R202 Alterations and Elements Added to Existing Facilities (Section-by-Section Analysis)
For example, if a new bench is installed on an existing sidewalk that has a cross slope exceeding 2 percent, the sidewalk is not required to be altered to reduce the cross slope because...
- Panda S.10 All Aluminum Lift & Slide System
-
2. a. i. Accessible parking
Note: for more information on parking and loading specifications including diagrams, slope requirements, location, and signage, refer to ADAAG Section 4.6 Parking and Passenger Loading Zones...
-
3. Terminology
planar surface with characteristics dimensions that affect vehicle dynamics, ride quality, dynamic loads, and drainage, for example, longitudinal profile, transverse profile, and cross slope...
-
Selection of Methodology
stabilizer, etc.) information (product type, manufacturer name, warranty/guarantees’ information, and similar data) SECTION #3 Trail pre‐installation specifications (soil type/composition, slope...
-
2.1 General
Where outdoor recreation access routes are provided within vehicular way (recreation site roadway), outdoor recreation access routes shall not be required to comply with 2.4 Slope, 2.5 Resting...
-
DOJ/DOT Joint Technical Assistance on the Title II of the ADA Requirements to Provide Curb Ramps when Streets, Roads, or Highways are Altered through Resurfacing
the public right of way, including streets, roads, and highways. 2 See 28 CFR 35.151(i)(1) (Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped...
-
1. Executive Summary
pedestrian access routes to be provided within pedestrian circulation paths located in the public right-of-way, and would establish proposed technical provisions for the width, grade, cross slope...
-
F216.2 Designations
Examples include interior signs labeling restrooms, room and floor numbers or letters, and room names....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
Detectable Warnings
This revision does not substantively change the requirements for the coordination of platforms and vehicle floors. 28 36 CFR part 1192...