Scoping [4.1.2(7), 4.1.3(16)] Specifications for signage apply according to the type of sign provided. ADAAG does not require building signage except to identify certain...
Search Results "Franchise Design"
Filters
Commonly Searched Documents
-
Scoping [4.1.2(7), 4.1.3(16)]
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
A4.30 Signage
[See subsections ...]
-
4.1.3(16) Building Signage
(16) Building Signage:
-
4.30 Signage
[See subsections ...]
-
4.30.1* General
Signage required to be accessible by 4.1 shall comply with the applicable provisions of 4.30.
-
SIGNAGE
[See subsections ...]
-
F216 Signs
[See subsections ...]
-
703 Signs
[See subsections ...]
-
4.30.1* GENERAL
Signage required to be accessible by 4.1 shall comply with 4.30.
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor.
-
4.30 SIGNAGE
[See subsections ...]
-
A.4.30 SIGNAGE
[See subsections ...]
-
11B-216 Signs.
[See subsections ...]
-
C. Americans with Disabilities Act and Section 504 of the Rehabilitation Act
The Americans with Disabilities Act (ADA) and Section 504 of the Rehabilitation Act are civil rights laws that prohibit discrimination on the basis of disability. Title II of the ADA...
-
11B-703 Signs
11B-703 Signs.
-
11B-703.4.1 Height above finish floor or ground
11B-703.4.1 Height above finish floor or ground. Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the...
-
11B-216 Signs
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
11B-703 Signs
[See subsections ...]
-
Social Security Administration Guide: Alternate Text for Images
Trademarks Many designations used by manufacturers and sellers to distinguish their products are claimed as trademarks....
-
Typical Day One - Basic Facilities Requirements
(30 minutes) This section will give you an overview of the Law including effective dates, regulations, design standards, enforcement and exemptions....
-
Accessibility Professionals Association (APA)
Accessibility Standards (TAS), and other current and upcoming accessibility codes and standards for any accessibility specialists, Registered Accessibility Specialists (RAS), architects, designers...
-
Tactile Design for Universal Access
Touch Graphics, Inc. was established in 1997 to refine and commercialize methods for tactile graphics production that were first demonstrated by Karen Luxton Gourgey and the Computer...
