Pursuant to a delegation by the Attorney General of the United States, Education shares in the enforcement of Title II by virtue of being the designated agency to investigate complaints...
Search Results "Franchise Design"
-
Title II Regulations
-
Tactile Design for Universal Access
Touch Graphics, Inc. was established in 1997 to refine and commercialize methods for tactile graphics production that were first demonstrated by Karen Luxton Gourgey and the Computer...
-
DO-IT Center
Promote the application of universal design to physical spaces, information technology, instruction, and services....
-
III-7.5165 Signage
Different requirements apply to various types of signs: 1) Signs designating permanent rooms and spaces (e.g. , men's and women's rooms, room numbers, exit signs) must have raised and...
-
Access CommunicationsTM Consulting Services
Everyone should be using these new rules, called the 2010 ADA Standards for Accessible Design. ...
-
F216 Signs
[See subsections ...]
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
11B-703 SIGNS
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
Mounting Height and Location
Section 703.4 covers the mounting height and location of signs with tactile characters. Such signs are to be mounted so that the tactile elements (raised characters and braille) are...
-
703 Signs
[See subsections ...]
-
VI. Interior Signs...
[See subsections ...]
-
11B-216 SIGNS
[See subsections ...]
-
Scoping [4.1.2(7), 4.1.3(16)]
Scoping [4.1.2(7), 4.1.3(16)] Specifications for signage apply according to the type of sign provided. ADAAG does not require building signage except to identify certain...
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
A4.30 Signage
[See subsections ...]
-
4.1.3(16) Building Signage
(16) Building Signage:
-
4.30 Signage
[See subsections ...]
-
4.30.1* General
Signage required to be accessible by 4.1 shall comply with the applicable provisions of 4.30.
-
SIGNAGE
[See subsections ...]
-
F216 Signs
[See subsections ...]
-
703 Signs
[See subsections ...]
-
4.30.1* GENERAL
Signage required to be accessible by 4.1 shall comply with 4.30.
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor.
