The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance also exceed 15 percent...
Search Results "Finished Grade"
Filters
Commonly Searched Documents
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance also exceed 15 percent...
-
TEST NO. 1 – INDIVIDUAL BUILDING TEST
measured between the planned entrance and all vehicular or pedestrian arrival points within 50 feet (15 240 mm) of the planned entrance exceed 15 percent; and The slopes of the planned finished...
-
11B-233.3.1.2.6.2 Test number one, individual building test
The slopes of the planned finished grade measured between the entrance and all vehicular or pedestrian arrival points within 50 feet (15,240 mm) of the planned entrance also exceed 15 percent...
-
Height and Depth: ADA Standard Section 605.2
Section 605.2 covers the current ADA Standards for the height and depth of urinals.
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground....
-
Height: ADA Standard Section 804.3.2
The kitchen work surface shall be 34 inches (865 mm) maximum above the finish floor or ground....
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-902.4.1 Clear floor or ground space
Knee and toe clearance complying with Section 11B-306 shall be provided, except that knee clearance 24 inches (610 mm) minimum above the finish floor or ground shall be permitted....
-
Section 2. Undisturbed site
"Undisturbed site" means the site before any construction, levelling, grading, or development associated with the current project....
-
Optional Inspection Pre-Concrete/Asphalt
(OPTIONAL INSPECTION Pre-Concrete/Asphalt) Exterior Site sidewalk forms and grading per page 1...
-
Optional Inspection Pre-Concrete/Asphalt
(OPTIONAL INSPECTION Pre-Concrete/Asphalt) Exterior Site sidewalk forms and grading per page 1...
-
11B-404.2.11 Vision lights
or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel located 43 inches (1092 mm) maximum above the finish...
-
Height: ADA Standard Section 407.2.1.1
Section 407.2.1.1 covers the current ADA Standards for the height of the elevator call controls.
-
Flush Controls: ADA Standard Section 604.9.5
Section 604.9.5 covers the current ADA Standards for flush controls on children's use water closets.
-
1134A.8, Item 5
Finished floor. The finished floor beneath the lavatory shall be extended to the wall....
-
1134A.8, Item 5
Finished floor. The finished floor beneath the lavatory shall be extended to the wall....
-
Technical Requirements
Are the specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.)....
-
Technical Requirements
The specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.). ...
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
Surfaces
Generally, smaller graded gravel with some fine material can be compacted to a firmer surface than larger graded gravel or when all gravel particles are the same size....
-
Technical Requirements
Technical Requirements—Specific numbers, conditions, and measurements that are required to be achieved (percent that must comply, dimensions, reach ranges, grades, trail width, etc.)....
-
11B-604.9.5 Flush controls
Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
-
7.4.4 Resting Intervals
Where the trail grade exceeds 1:20 (5 percent), resting intervals shall be provided as specified in Table 7.4.3.1....