The profile must be represented as a series of elevation values taken along with a series of horizontal distance values along the wheel track. 4.3 The PRI scale starts at zero for a surface...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
4. Summary of Practice
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
Appendix 4 – References
Adelaide South Australia, Public Buildings Department. Bails, J.H. (1983). ...
-
"Direct Threat" to Self
Nor could an employer reject an applicant with a visual or mobility disability because of a generalized fear of risks to this person in the event of a fire or other emergency....
-
809.3.1.2 Residential Dwelling Unit Smoke Alarms
This requirement is consistent with the NFPA 72 National Fire Alarm Code, which is referenced in the section....
-
Emergency Planning
If the facility does not have evacuation elevators, does it have areas of refuge (fire-rated spaces where people who cannot use stairs can go to register a call for help and wait for responders...
-
Conventions Used In This Guide
Number Hyperlink] Used for Safe Harbor hyperlinks [F] Used to indicate sections that are adopted by the CBC and also in the California Fire...
-
PUBLIC USE
Public use may be provided at a building or facility that is privately or publicly owned....
-
1009.4.2 Area of refuge
Areas of refuge are not required in buildings and facilities equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1....
-
II-7.3100 General
Many public entities provide telephone emergency services by which individuals can seek immediate assistance from police, fire, ambulance, and other emergency services....
-
Road Roughness Analysis
Serviceability is a criterion measure for highway surfaces based on surface roughness, which is then used as a determinant need for rehabilitation of highway surfaces....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
Sec. 469.054(c)(3)
(3) the processing of an application for a variance from accessibility standards for a building or facility....
-
106.5.3 Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
3.2 Dimensional Tolerances
All dimensions are subject to conventional building industry tolerances for field conditions....
-
Construction (Trail Terminology)
Construction is building a new trail or segment of trail where there was no trail before....
-
4.1.6(1) General
Alterations to existing buildings and facilities shall comply with the following:...
-
3.2 DIMENSIONAL TOLERANCES
All dimensions are subject to conventional building industry tolerances for field conditions....
-
ELEMENT
[DSA-AC] An architectural or mechanical component of a building, facility, space or site....
-
OCCUPANT LOAD
The number of persons for which the means of egress of a building or portion thereof is designed....
-
ELEMENT
[DSA-AC] An architectural or mechanical component of a building, facility, space or site....
-
OCCUPANT LOAD
The number of persons for which the means of egress of a building or portion thereof is designed....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....