When the surface of clear ground spaces and turning spaces is constructed of asphalt, concrete, or boards, the slope of the surface must be no steeper than 1:48 (2 percent) in any direction...
Search Results "9-1-1 Service"
Filters
Commonly Searched Documents
-
Surface and Slope [1015.5 and 1015.6]
-
407.2.2.2 Visible Signals
The visible signal elements shall be 2 1/2 inches (64 mm) minimum measured along the vertical centerline of the element....
-
207.1 General
International Building Code (2000 edition and 2001 Supplement) or section 1007 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)...
-
3.1.1 Vehicle Parking
Accessible RV Parking Areas Number of Camping Units Minimum Number of Accessible RV Parking Areas in units designated for Recreational Vehicles and Trailers 1...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-1005.1 Accessible routes
Exceptions: 1. Accessible routes serving floating fishing piers and platforms shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in Section 11B-1003.2.1 _|Boat Slips|_. 2....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
1.2 Background
Access Board. 6 7 8 9 10 Note that detectable warnings with truncated domes as used in the U.S. are only one of several types of tactile patterns used through the world as detectable...
-
General: ADA Standard Section 101.1
(1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of...
-
11B-604.5 Grab bars
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
Patient support safety factors: Patient support devices must meet applicable safety factors as delineated in IEC 60601-1. These factors typically range from 4x to 8x....
-
Accessible Routes to Press Boxes
The 1991 Standards, at sections 4.1.1(1) and 4.1.3(1), cover all areas of newly constructed facilities required to be accessible, and require an accessible route to connect accessible entrances...
-
11B-1002.2 Accessible routes
Exceptions: 1. ...
-
CHAPTER 35 REFERENCED STANDARDS
The application of the referenced standards shall be as specified in Chapter 1, Scope and Administration, Division 1, Sections 1.1.5 and 1.1.7, and in Chapter 1, Scope and Administration...
-
§ 1194.22 Web-based intranet and internet information and applications
Note to §1194.22: 1....
-
3(2)
(See Fig. 1 (a), (b), and (c).) Openings more than 24 inches in depth are not considered doorways. (See Fig. 1(d).)...
-
402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
Texting
Text messages have a better chance of getting through in emergencies, even when the internet, cellular and landline phone networks may be very slow or fail.1 Sending a text message to 911...
-
1.1.6 Flatness of walk cross slope
Measure along two paths, each with the end of the digital inclinometer 1 ft (300 mm) from the edge of the path and placed toward the middle of the path. See Fig. 2....
-
68.51. Review of Construction Documents
(New rule section effective November 5, 2001, 26 TexReg 8807; amended effective February 1, 2005, 30 TexReg 382; amended effective March 1, 2007, 31 TexReg 884; amended effective May 15,...
-
11B-703.7.2.6.3 Unisex toilet and bathing facilities
The combined circle and triangle symbol shall consist of a circle symbol 1/4 inch (6.4 mm) thick and 12 inches (305 mm) in diameter with a 1/4 inch (6.4 mm) thick equilateral triangle symbol...
-
11B-1002.2 Accessible routes
Exceptions: 1....
-
CHAPTER 35 REFERENCED STANDARDS
The application of the referenced standards shall be as specified in Chapter 1, Scope and Administration, Division 1, Sections 1.1.5 and 1.1.7, and in Chapter 1, Scope and Administration...