Receptacle outlets that do not satisfy these specifications are acceptable provided that comparable receptacle outlets, that perform the same functions, are provided within the same area...
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
1136A.1 Receptacle heights
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
Table of Contents
Systems F216 Signs F217 Telephones F218 Transportation Facilities F219 Assistive Listening Systems F220 Automatic Teller Machines and Fare Machines F221 Assembly Areas...
-
Hill-Rom Liko® M220 / M230 Mobile Lift, Senior Video
Video shows Liko® M220 / M230 Mobile Lift being used to lift a person who had fallen to the floor....
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing...
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
LaCantina Aluminum Wood Door System
rail profile Engineered aluminum panel construction is better suited to most environments compared to a solid wood door Sill options that suit weather exposure or flush floor...
-
II-6.2100 General
If ADAAG is chosen, however, public entities are not entitled to the elevator exemption (which permits certain buildings under three stories or under 3,000 square feet per floor to be constructed...
-
Pilot Rock T300/T400 Series Round, Pedestal Table With CURVED Seats - Using Perforated Steel
Series Overview Series T300 and Series T400 Round Picnic Tables are a perfect fit for malls, patios, pools, decks, restaurants, cafes, rec centers, common areas, schools, golf courses...
-
Mirrors: ADA Standard Section 603.3
Section 603.3 covers the current ADA Standards for mirrors in toilet and bathing rooms.
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
Jean Tessmer
I have specified and had this particular pocket door privacy latchset installed in new construction where I did not have enough door clear floor space for a swing door....
-
Diagonal Curb Ramps: ADA Standard Section 406.6
Section 406.6 covers the current ADA Standards for diagonal curb ramps.
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Proline Drain: Quick Drain USA - Side Waste Outlet Tub to Shower Conversion
When completing a tub to shower conversion where there is no vertical penetration between the floors, and only a horizontal penetration to the plumbing wall, a side waste outlet is necessary...
-
211 Drinking Fountains
Scoping requirements apply where drinking fountains are provided on exterior sites, on floors, and within secured areas....
-
National Network of ADA Centers
In Section 5.1, pages 66 and 69, justifications for a higher transfer height is made at 25” and chapter 6 (page 139) a more clear discloser is given for a high height number and the exclusion...
-
Disability Access - Tips for the small business
California Commission on Disability Access http://www.ccda.ca.gov
-
Height: ADA Standard Section 611.4
Section 611.4 covers the current ADA Standards for the height of the laundry compartment in top loading machines and front loading machines.
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
Executive Summary
Key requirements apply to clear floor area, knee and toe clearances, maneuvering clearances, reach limits, grip force requirements and door usability factors....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
Homemods.org
., sleeping on the first instead of second floor) and renovations (e.g., installing a roll-in shower)....
