Section 611.4 covers the current ADA Standards for the height of the laundry compartment in top loading machines and front loading machines.
Search Results "Clear Floor Area"
Commonly Searched Documents
-
Height: ADA Standard Section 611.4
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
- Lutron Sivoia QED Kirbé Vertical Motorized Drapery System
-
Executive Summary
Key requirements apply to clear floor area, knee and toe clearances, maneuvering clearances, reach limits, grip force requirements and door usability factors....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
Homemods.org
., sleeping on the first instead of second floor) and renovations (e.g., installing a roll-in shower)....
-
Can back doors and freight elevators be used to satisfy the program accessibility requirement?
For example, a back door is acceptable if it is kept unlocked during the same hours the front door remains unlocked; the passageway to and from the floor is accessible, well-lit, and neat...
-
4) Entrances
UFAS: At least one principal entrance at each grade floor level must be accessible....
-
4. Assess During the Planning, Installation and Maintenance Phases
Measure the clear ground space in all directions with a digital level to ensure it is less than 1:48 or 2.08%....
-
G. Women's Spa and Fitness Center Locker Room
Clear space sufficient to allow a person using a wheelchair to make a parallel transfer onto the bench will be provided. 2010 Standards §§ 222.1, 305, 803.4, and 903....
-
1008.2.3 Water Play Components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with 302, 403.3, 405.2, 405.3, and 1008.2.6...
-
1008.2.3 Water Play Components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with 302, 403.3, 405.2, 405.3, and 1008.2.6...
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
1008.2.3 Water Play Components
Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with 302, 403.3, 405.2, 405.3, and 1008.2.6...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
TM 2017-25 Door and Gate Surfaces Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish floor...
- LaCantina Multi-slide Aluminum Sliding Door System
- LaCantina Aluminum Slider System
-
11B-219.4 Location
If the assistive-listening system provided is limited to specific areas or seats, then such areas or seats shall be within a 50-foot (15240 mm) viewing distance of the stage or playing area...
- Yale Real Living™ Digital Door Viewer
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
Change in Direction: ADA Standard Section 405.7.4
Section 405.7.4 covers the current ADA Standards for the change in direction at ramp landings.
-
1.6 Testing Site and Conditions
The area was clear of obstructions and was situated so that no shadows fell on the four sidewalk sections during the hours when testing was conducted....
-
Alterations and Additions
area accessible....
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....