The provision and location of wheelchair seating spaces and companion seats and designated aisle seats in newly constructed or altered assembly areas shall be governed by the standards for...
Search Results "Fire and Safety Standard"
-
§ 36.308(b) New construction and alterations
-
K. Dauphin Street Accessible Entrance and Passenger Loading Zone
Street Accessible Entrance and Passenger Loading Zone (1) Defendants will reconstruct the driveway, sidewalks, and entrance ramp of the Dauphin Street Entrance to the Tower to meet 2010 Standards...
-
12204(c)(1) In general
requirements for alterations that will threaten or destroy the historic significance of qualified historic buildings and facilities as defined in 4.1.7(1)(a) of the Uniform Federal Accessibility Standards...
-
D5
[ADA Standards §§ 4.1.6(3)(d)(ii), 4.13.8] Yes No If No, replace threshold with one with beveled sides or add a sloped insert....
-
K4
[ADA Standards § 5.5] Yes No...
-
M5
[ADA Standards §§ 4.1.6(3)(d)(ii); 4.13.8] Yes No If No, replace threshold with one with beveled sides or add a sloped insert....
-
D.1. - How does Section 508 affect the requirements development phase of an acquisition?
Section 508 requires agencies to take additional considerations into account when defining their needs for EIT – namely the Access Board’s standards....
-
1c
[ADA Standards 4.21.2] Yes __ No __ N/A __ Comments: ________________________________________...
-
Flange way gap
(DOT ADA Standard 810.10.)...
-
I1a
[ADA Standards § 4.31.2, Fig. 44 (a)] Yes No...
-
D4
[ADA Standards § 4.13.6, Fig. 25] Yes No If No, leave the door propped open or find another accessible entrance....
-
301.1 Scope
Chapter 3 shall apply to ICT where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced in any other chapter of the 508 Standards...
-
4.17.4 Toe Clearances
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.17.4 TOE CLEARANCES
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
Stability or Stable Surface
stable surface is one that remains unchanged by contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition (2010 ADA Standards...
-
Self Contained, Closed Products - Side Reach Range
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
-
World Disability Union (WDU)
Our Goal Prevention of disability Equality of Opportunity Rehabilitation "lmprovement5" Universal Standards Our Values Pustice Affection Brotherhood Goodness Our Agenda...
-
Corbin Russwin Inc. ED4000 Series Narrow Stile Exit Device
durability, smooth operation and easy installation Wide range of designs and finishes to match other Corbin Russwin products One-point dogging Devices satisfy UL/cUL safety...
-
CHG Hospital Beds Spirit Select
Shorter, frail, elderly, and post-surgery patients benefit from the safety of a bed that goes 10" low....
-
502.3.1 Object Information (Section-by-Section Analysis)
It is also consistent with existing 508 Standards § 1194.21(d), but more explicitly provides for the user to be able to change data values, not just read them....
-
502.2.1 User Control of Accessibility Features (Section-by-Section Analysis)
This provision would be new to the 508 Standards and 255 Guidelines, though it draws on the prohibition in § 1194.21(b) of the existing 508 Standards against disrupting or disabling accessibility...
-
Accessible Routes in Dwelling Units with Mobility Features
The 2010 Standards at sections 233.3.1.1, 809.1, 809.2, 809.2.1, and 809.4 will require all spaces and elements within dwelling units with mobility features to be on an accessible route....
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-04 Signs - Exit Doors
However, a RAS has no authority to require compliance with TAS 216.4.1 based on RAS Bulletin 2012-01 since a referenced standard (ICC/IBC) dictates the location of exit passageway, exit...
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
The change harmonizes this provision with the international standards. IEC 60601-2-52 provides requirements for stretchers and includes a lift clearance at the 39 inch width....
