Where passenger loading zones are provided, the 1991 Standards, at sections 4.1.2(5) and 4.6.6, require at least one passenger loading zone to be accessible....
Search Results "ANSI/HFES: American National Standards Institute/ Human Factors and Ergonomics Society"
Commonly Searched Documents
-
Passenger Loading Zones
-
General
Where parking spaces are provided, the 1991 Standards, at sections 4.1.2 (5)(a) and (7) and 7(a), and the 2010 Standards, at section 208.1, require a specified number of the parking spaces...
-
205 and 309 Operable Parts
205 and 309 Operable Parts Section 4.1.3, and more specifically sections 4.1.3(13), 4.27.3, and 4.27.4 of the 1991 Standards, require operable parts on accessible elements, along accessible...
-
ENDNOTES
iv The Access Board, ADAAG Standards, www.accessboard.gov/adaag v Handinet, www.handinet.org/adaag.htm#4.3 (Accessible Route) The Access Board, ADAAG Standards....
-
11B-201.1 Scope
[ADA Title III] §36.406(b) Standards for New Construction and Alterations; Scope of Coverage....
-
Restrooms Main Lobby
See Standards § 4.13.6. l....
-
7. APPLICABILITY
These new DoD Standards are effective immediately....
-
11B-201.1 Scope
[ADA Title III] §36.406(b) Standards for New Construction and Alterations; Scope of Coverage....
- Rebuilding Together Long Island - Farmingdale, NY
-
11B-202.3.1 Prohibited reduction in access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Multiple Single-User Toilet Rooms
Where multiple single-user toilet rooms are clustered in a single location, fifty percent (50%), rather than the one hundred percent (100%) required by the 1991 Standards, are required to...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily used by patients in a seated position as described in its proposed standard...
-
B.3.iv - Who makes the determination that a product meets equivalent facilitation?
The vendor may assert that its product meets or exceeds the level of accessibility required by a particular standard through equivalent facilitation....
-
§ 36.304(d)(2)(iii)
., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
-
Alterations and Additions
This guide provides an introduction to the scoping requirements that form the basis for the Department of Justice’s 2010 ADA Standards and the Department of Transportation's ADA Standards...
-
11B-202.3.1 Prohibited reduction in access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Electronic File(s) As An Alternate Format
The National Center on Disability and Access to Education (NCDAE) website provides helpful "cheatsheets" for creating accessible documents in various file formats....
-
III−1.6000 Private clubs
entity is a private club for purposes of the ADA if it is a private club under title II of the Civil Rights Act of 1964, which prohibits discrimination on the basis of race, color, and national...
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508 Standards consistent...
-
M101.1 Purpose
The proposed standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....
-
11B-904.4.1 Parallel approach
[2010 ADA Standards] 904.4.1 Parallel Approach....
-
11B-604.4 Seats
[2010 ADA Standards] 604.4 Seats....
-
11B-502.5 Vertical clearance
[2010 ADA Standards] 502.5 Vertical Clearance....
- Mental Health America (MHA)