Circular Cross Section and Clearance (§505.5, §505.7)
Search Results "Handrail Fitting"
Filters
Commonly Searched Documents
-
Circular Cross Section and Clearance (§505.5, §505.7)
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Non-Circular Cross Section and Clearance (§505.5, §505.7)
-
Dispersion: ADA Standard Section 1005.2.1.1
Railings, guards, or handrails required to comply with 1005.2.1 shall be dispersed throughout the fishing pier or platform. Advisory 1005.2.1.1 Dispersion....
-
§ 38.115 Interior circulation, handrails and stanchions
[See subsections ...]
-
§ 38.77 Interior circulation, handrails and stanchions
[See subsections ...]
-
§ 38.57 Interior circulation, handrails and stanchions
[See subsections ...]
-
Sections 4.8.5 and 4.9.4
Section 505.6 requires handrail gripping surfaces to be continuous along their length and not to be obstructed along their tops or sides....
-
Single riser stair handrail extension
For a stair with one riser only, what is the length of the bottom handrail exension required?...
-
Access-Able Designs Child Dressing Bench CH-101
The child dressing Bench has adjustable length legs allowing parents or caregivers to stand upright while caring for a disabled child. The legs adjust from 34-36...
-
1008.2.5.3.1 Handrail Gripping Surfaces
1008.2.5.3.1 Handrail Gripping Surfaces....
-
405.8 Handrails
405.8 Handrails. Ramp runs with a rise greater than 6 inches (150 mm) shall have handrails complying with 505....
-
210 Stairways
Otherwise, the requirement for complying handrails should not apply. Response....
-
405.8 Handrails
Ramp runs with a rise greater than 6 inches (150 mm) shall have handrails complying with 505....
-
405.8 Handrails
Ramp runs with a rise greater than 6 inches (150 mm) shall have handrails complying with 505....
-
§ 38.77(c)
(c) At all doors on level-entry vehicles, and at each entrance accessible by lift, ramp, bridge plate or other suitable means, handrails, stanchions, passenger seats, vehicle driver seat...
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on both sides....
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on each side....
-
T207.4 Circulation Paths
Handrails, stanchions, and handholds shall be provided along circulation paths in accordance with T207.4....
-
803.4 Benches
A bench complying with 903 shall be provided within the room.
-
11B-803.4 Benches
A bench complying with Section 11B-903 shall be provided within the room.
-
803.4 Benches
A bench complying with 903 shall be provided within the room.
-
803.4 Benches
803.4 Benches. A bench complying with 903 shall be provided within the room.
