Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
Search Results "1991 Standards"
-
11B-608.2.2 Standard roll-in type shower compartments
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
11B-608.3.2 Standard roll-in type shower compartments
[2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
11B-608.3.2 Standard roll-in type shower compartments
[2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
- ADA Shop Talk
-
2.5.2.3 FDA Standards
2.5.2.3 FDA Standards The FDA maintains a list of recognized consensus standards on their web site,P which includes standards from IEC, ISO, and other organizations....
- Certified Access Specialist Institute (CASI)
- What is the ADA National Network?
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.2.2
Section 608.2.2 covers the current ADA Standards for the size of standard roll-in type shower compartments.
-
12186(a)(3) Standards
(3) Standards The regulations issued pursuant to this subsection shall include standards applicable to facilities and vehicles covered by sections 12182(b)(2) and 12184 of this title....
- How to Remove and Install a Toilet from American Standard
-
Using the ADA Standards
The design standards issued under the Americans with Disabilities Act (ADA) by the Department of Justice and the Department of Transportation are used to ensure access to the built environment...
-
11B-201.1 Scope
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
11B-201.1 Scope
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
4. Information and Communication Technology (ICT) Standards and Guidelines
From the Board’s website, regarding the ICT Accessibility 508 Standards and 255 Guidelines: "These standards address access to information and communication technology (ICT) under Section...
-
§ 36.406(a) Applicable standards
(a) Applicable standards....
-
A. Proposed 508 Standards
The proposed standards replace the current product-based approach with a functionality-based approach....
-
Highlights of the 2010 Standards
Highlights of the 2010 Standards...
-
Other international standards
NZS 3109 Concrete Construction Standard, Standards New Zealand (this standard requires the elevation of a slab to be ±5 mm of that specified) NZS 3114 Specification for...
- Introduction to Web Accessibility and W3C Standards
-
4 Appendix B to part 36: Analysis and Commentary on the 2010 ADA Standards for Accessible Design
This summary addresses selected substantive changes between the 1991 ADA Standards for Accessible Design (1991 Standards) codified at 28 CFR part 36, app....
- American Standard Acrylic Shroud for American Standard Selectronic Faucets
-
11B-202.3.1 Prohibited reduction in access
If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the number...
-
11B-202.3.1 Prohibited reduction in access
If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the number...
