PSE shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned...
Search Results "Floor Identification"
-
E. Restaurants and Concessions:
-
Location
Van-accessible parking spaces located in parking garages may be clustered on one floor (to accommodate the 98-inch minimum vertical height requirement)....
-
§ 38.77(c)
Vertical stanchions from ceiling to floor shall not interfere with wheelchair or mobility aid circulation and shall be kept to a minimum in the vicinity of accessible doors....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
106.5.45 Primary Function
containing a primary function include, but are not limited to: (i) Remodeling merchandise display areas or employee work areas in a department store; (ii) Replacing an inaccessible floor...
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
Cavity Sliders CL100 ADA LaviLock Hardware Set with 'Vacant / In Use' Indicator
including Emergency Release CL100 Mortise Lock Case IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum and 48 inches (1220 mm) maximum above the finished floor...
-
Smith System Trespa Planner Science Table 30″ Deep 11288
The 1″ adjustable leveling glides provide stability on uneven floors. A science classroom demands compliance with strict codes and standards....
-
Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
Standard system features include: Trackless floor design for unobstructed flow and expedient traffic management Low profile 2-3/4" header for aesthetic appeal Choice...
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
Summary of Major Provisions
The final rule adds new technical requirements for floor surfaces, bedrooms, and weather alert systems in emergency transportable housing units with mobility features....
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
-
Test Procedures
The procedures are based on a draft national standard test method for the firmness and stability of ground and floor surfaces (RESNA 2000), which uses an average of five readings....
-
1.0 APPLICATION
Where existing individual site furnishings are altered or replaced, the floor or ground surface under or around them is not required to be altered solely because an accessible furnishing...
-
D. Reasonable Modifications
However, some people have disability-related needs for cots to be modified or may need to sleep on cots or beds instead of on mats placed on the floor....
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
M301.3.1 Transfer Supports
Figure 5.3-10: Illustration of a concept (not to scale) for a detachable floor mounted support....
