Search Results "Signage Height"

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  1002.6.2 Transfer Height

  The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  1002.6.2 Transfer Height

  The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Effect of Handhelds on Transfer Height

  Participant preference for grab bars and backrest heights for protocols B through E are shown in Table 17. For all protocols the tall grab bars were preferred....

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  902.4.2 Height

  The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  902.4.2 Height

  The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  Height – M301.2.1 & M302.2.1

  Height – M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic and...

• Federal Documents > Technical Assistance > ADA Guide for Places of Lodging: Serving Guests Who Are Blind or Who Have Low Vision
  Signs

  Signs that provide direction to, or information about, functional spaces (§ 4.1.3(16)(b)) must comply with requirements for: Character proportion (§ 4.30.2); Character height...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-1008.2.5.3.2 Handrail height

  The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-1008.2.5.3.2 Handrail height

  The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-605.2 Height and depth

  Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground. Urinals shall be 13½ inches (343 mm) deep minimum...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-1008.2.5.3.2 Handrail height

  The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Raised Characters

  Specifications for raised characters in section 703.2 address the depth, case, style or font type, character proportion and height, stroke thickness, and character and line spacing....

• Federal Documents > Technical Assistance > 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG)
  505.4 Height

  Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces....

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Transfer Protocols

  Summary description and experimental setup for the five protocols (A-E) Protocol A: Adjustable Height Level height, maximum height transfer and minimum height...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-216.1 General

  The substantive difference between the CBC and 2010 ADAS scoping for signage at parking facilities is that signs identifying permanent rooms and spaces, directional and informational signs...

• State and Local Documents > State Technical Assistance > DSA Summary of 2016 California Building Code Changes for Accessibility
  Sign

  NOTES Sign Clarification of terminology regarding accessibility requirements for “signs” as individual building elements as opposed to “signage...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-411.2.1.2.4.2 Size

  Elevator assignment characters shall be 1 inch high (25 mm) minimum.

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  F216 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703 SIGNS

  [See subsections ...]

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  216 Signs

  [See subsections ...]

• Federal Documents > Technical Assistance > ADA Checklist for New Lodging Facilities
  VI. Interior Signs...

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  216 Signs

  216 Signs