This measures the clear width of the door opening through which people pass, which is less than the width of the door itself....
Search Results "Continuous Width"
Filters
Commonly Searched Documents
-
Measuring Door Openings
-
1017.2 Aisles in assembly spaces
1017.2 Aisles in assembly spaces. Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1028.
-
N. Health Units/Medical Care Areas
N. Health Units/Medical Care Areas In many schools, where emergency shelters are often located, nurses' rooms or other types of health care facilities may be provided. These...
-
G. Compartment Size
G. If the accessible toilet is in a stall, does the stall measure at least 60" wide and 56" deep if it is wall mounted or 59" deep if it is floor mounted to allow persons who use...
-
N1
N1. Is there an accessible route, at least 36 inches wide, that connects each of the shelter activity areas with the health units and medical care areas (it may narrow to 32 inches...
-
K2
K2. Is there an accessible route that is at least 36 inches wide that connects accessible tables with serving, condiment, and dispenser areas? [ADA Standards § 5.3;...
-
§ 36.304(b)(8)
(8) Widening doors;
-
Sec.36.304(b)(8)
(8) Widening doors;
-
4.1.6(4)(d)
(d) Doors. (i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch...
-
§100.205(c)(2)
(2) All the doors designed to allow passage into and within all premises are sufficiently wide to allow passage by handicapped persons in wheelchairs; and
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open.
-
§ 38.153(c)
(c)
-
Are bollards, poles, columns, or other elements permitted within the marked area of access aisles?
(The width of spaces and aisles is measured to the centerline of markings but can include the full line width where there is no adjacent parking space or aisle)....
-
11B-604.8.1.1 Size
When deployed the baby changing tables shall not obstruct the required width of the accessible route except as allowed by Section 11B-307.2....
-
7.4.5 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 7.4.5 at intervals of 1000 feet (300 m) maximum. ...
-
Van Space: Wider Parking Space
Van Space: Wider Parking Space Recommendation: Sizing all accessible spaces (or access aisles) for van accessibility provides greater convenience and helps ensure that...
-
406.4 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
Continuity: ADA Standard Section 505.3
Section 505.3 covers the current ADA Standards for the continuity of handrails.
-
406.4 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1262
Five Knuckle - Full Mortise Swing Clear Hinge BB1262 - Ball Bearing - Heavy Weight Description: - ANSI A8121 - For square edge doors - Non-rising removable pin...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
Five Knuckle - Full Mortise Swing Clear Hinge BB1363 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For beveled edge doors - Non-rising removable pin...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
Five Knuckle - Full Mortise Swing Clear Hinge BB1361 - Ball Bearing - Standard Weight Description: - ANSI A5122 - For beveled edge doors - Non-rising removable...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1264
Five Knuckle - Half Mortise Swing Clear Hinge BB1264 - Ball Bearing - Heavy Weight Description: - ANSI A8221 - For square edge doors - Non-rising removable pin...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7002
Three Knuckle - Full Mortise Swing Clear Hinge AB7002 - Concealed Anti-Friction Bearing - Standard Weight Description: - For beveled edge doors - ANSI A8122 -...
