Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
Search Results "Side Transfer Surface"
Commonly Searched Documents
-
11B-407.4.10.1 Location
-
§382.57(c)(6)(iv)(A) Contrast
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
505 Handrails
Specifications for handrails in section 505 apply to those provided at ramps, stairs, and along walking surfaces....
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
§ 382.57(c)(6)(iv)(A) Contrast
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
707.6.1 Input Controls
Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
-
410.6 Doors and Gates
Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
604.6 Flush Controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2. Advisory 604.6 Flush Controls....
-
604.6 Flush Controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2. Advisory 604.6 Flush Controls....
-
406.4 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
604.6 Flush Controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2. Advisory 604.6 Flush Controls....
-
3.1.4.2 Width of RV Campsite and Dump Station Vehicle Parking Areas
Where a double camping unit or dump station is provided to accommodate two RVs or trailers side-by-side in a vehicle parking, the total width of the vehicle parking area may be reduced from...
- Zurn Insulation Combination Kit: One Trap Protector and Two Stop Supply Protectors
-
How is slip resistance measured?
The coefficient of friction between the two surfaces is the ratio of the horizontal and vertical forces required to move one surface over another to the total force pressing the two surfaces...
-
Stabilizer
the surface....
-
Acknowledgements
Acknowledgements The National Trail Surfaces Study has taken a number of turns over the past several years....
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
R407.9 Edge Protection
Edge protection complying with R407.9.1 or R407.9.2 shall be provided on each side of ramp runs and ramp landings....
-
M8
Is there at least 18 inches between the center of the toilet and the side of the adjacent lavatory? [ADA Standards § 4.16.2; Fig. 28] Yes No...
-
H20
Is the flush valve located on the wide side adjacent to the lavatory or is an automatic flush valve provided? [ADA Standards § 4.16.5] Yes No...
-
802.4.1 Armrests
Where armrests are provided on the seating in the immediate area, folding or retractable armrests shall be provided on the aisle side of the seat....
-
4.9.4 Handrails
Stairways shall have handrails at both sides of all stairs. Handrails shall comply with 4.26 and shall have the following features:...