(f) If, after January 26, 1993, HWI constructed an addition (as defined in ADA Standards § 3.4) to an Owned Hotel or Joint Venture Hotel that was originally constructed for first occupancy...
Search Results "Proposed Standard"
-
15(f)
-
Further Guidance
Technical assistance and additional guidance on using the ADA Standards is available from the: U.S....
-
Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments)
The technical specifications are the same as the 1980 version of ANSI A117.1 standard, except as noted in the text by italics....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.2.2.1 Visible and audible signals
[2010 ADA Standards] 2. In existing elevators, a signal indicating the direction of car travel shall not be required....
-
11B-407.4.6.2.1 Size and shape
[2010 ADA Standards] 407.4.6.2.1 Size. Buttons shall be ¾ inch (19 mm) minimum in their smallest dimension....
-
PRIVATE BUILDING OR FACILITY
[2010 ADA Standards 106.5] Private Building or Facility....
-
36. Must an employer provide a reasonable accommodation for an employee with a disability who violated a conduct rule that is job- related for the position in question and consistent with business necessity?
An employer must make reasonable accommodation to enable an otherwise qualified employee with a disability to meet such a conduct standard in the future, barring undue hardship, except where...
-
226 and 902 Dining Surfaces and Work Surfaces
226 and 902 Dining Surfaces and Work Surfaces Section 226.1 of the 2010 Standards require that where dining surfaces are provided for the consumption of food or drink, at least five...
-
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151
This exception was contained in the title III regulation and in the 1991 Standards (applicable to both public accommodations and facilities used by public entities), so it has applied to...
-
2.4
2.4 The United States shall be prohibited from filing suit against Cinemark for alleged violations of ADA Standard 4.33.3 with respect to any of Cinemark's Existing Theaters, any of...
-
ABBREVIATIONS
Reg. 7-26-91) plus revisions to date ANSI A117.1 American National Standard for Buildings and Facilities - Providing Accessibility and Usability for Physically Handicapped People -...
-
Title III - Private Entities
They also must comply with architectural accessibility standards for new and altered buildings; reasonable modifications to policies, practices, and procedures; and effective communication...
-
F.1. - Under what circumstances may an agency conclude that no EIT is available that meets the Access Board’s technical provisions?
An agency may conclude that EIT meeting the applicable technical provisions of the Access Board’s standards is not available (and purchase EIT that does not meet those provisions) when it...
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
ANSWER: The performance standard and other requirements of section 37.42(a) apply to stations that are approved for entry into final design or that begin construction or alteration...
-
4.1.6(3)(d)
(d) In making the determination as to what constitutes "substantial alteration," the agency issuing standards for the facility shall consider the total cost of all alterations (including...
-
Communication Access at Doors [§806.3.2, §809.5.5]
In addition to requirements for two-way communication systems provided at restricted entrances, the Standards include requirements for communication access in transient lodging and residential...
-
Section 35.151 New construction and alterations (Section-by-Section Analysis)
This exception was contained in the title III regulation and in the 1991 Standards (applicable to both public accommodations and facilities used by public entities), so it has applied to...
-
11B-405.5 Clear width
[2010 ADA Standards] 405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
11B-607.4 Grab bars
[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
-
206.2.5 Restaurants and Cafeterias
Florida requirements may be waived down to the ADA Standards requirements....
-
224.7 Housing at a place of education
The term "sleeping room" is intended to be used interchangeably with the term "guest room" as it is used in the transient lodging standards. Exceptions: 1....
-
Changes in Level and Horizontal Gaps
The referenced vehicle guidelines (like those of the proposed rule) permit the use of mini high platforms, car-borne or platform-mounted lifts, ramps or bridge plates, or manually deployed...