Because an employer does not have to excuse failure to meet production standards that are consistently applied, even if the difficulty was caused by a health condition or the side effects...
Search Results "Proposed Standard"
-
5. When Is It Important for My Client to Request a Reasonable Accommodation?
-
H15
[ADA Standards § 4.17] Yes No If No, check to see if another toilet room provides a wide accessible toilet stall, note its location for shelter planners, and answer all toilet...
-
12184(c)(1) Exception
historic or antiquated character of a historical or antiquated rail passenger car, or a rail station served exclusively by such cars, or would result in violation of any rule, regulation, standard...
-
Problem Four
Three standard parking spaces are converted into an accessible parking space with an access aisle....
-
Digital inclinometers (SmartTool®)
Digital inclinometers (SmartTool®), while slightly more expensive than standard levels, are easy to calibrate and use and can measure slopes in degrees, percent, and fractions per foot....
-
Are curved or circular ramps allowed?
Ramps without level landings at changes in direction typically will not meet the Standards due to resulting compound slopes....
-
Where Required: Site Arrival Points [§206.2.1]
Where Required: Site Arrival Points [§206.2.1] This guide explains scoping and technical requirements for accessible routes in the ADA Standards. ...
-
15(f)
(f) If, after January 26, 1993, HWI constructed an addition (as defined in ADA Standards § 3.4) to an Owned Hotel or Joint Venture Hotel that was originally constructed for first occupancy...
-
Further Guidance
Technical assistance and additional guidance on using the ADA Standards is available from the: U.S....
-
Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments)
The technical specifications are the same as the 1980 version of ANSI A117.1 standard, except as noted in the text by italics....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.2.2.1 Visible and audible signals
[2010 ADA Standards] 2. In existing elevators, a signal indicating the direction of car travel shall not be required....
-
11B-407.4.6.2.1 Size and shape
[2010 ADA Standards] 407.4.6.2.1 Size. Buttons shall be ¾ inch (19 mm) minimum in their smallest dimension....
-
PRIVATE BUILDING OR FACILITY
[2010 ADA Standards 106.5] Private Building or Facility....
-
What Kind Of Documentation Is Sufficient To Support A Request For Testing Accommodations?
Past Testing Accommodations on Similar Standardized Exams or High-Stakes Tests. ...
-
226 and 902 Dining Surfaces and Work Surfaces
226 and 902 Dining Surfaces and Work Surfaces Section 226.1 of the 2010 Standards require that where dining surfaces are provided for the consumption of food or drink, at least five...
-
State and Local Government Facilities: Guidance on the Revisions to 28 CFR Section 35.151
This exception was contained in the title III regulation and in the 1991 Standards (applicable to both public accommodations and facilities used by public entities), so it has applied to...
-
2.4
2.4 The United States shall be prohibited from filing suit against Cinemark for alleged violations of ADA Standard 4.33.3 with respect to any of Cinemark's Existing Theaters, any of...
-
ABBREVIATIONS
Reg. 7-26-91) plus revisions to date ANSI A117.1 American National Standard for Buildings and Facilities - Providing Accessibility and Usability for Physically Handicapped People -...
-
Title III - Private Entities
They also must comply with architectural accessibility standards for new and altered buildings; reasonable modifications to policies, practices, and procedures; and effective communication...
-
206.2.5 Restaurants and Cafeterias
Florida requirements may be waived down to the ADA Standards requirements....
-
F.1. - Under what circumstances may an agency conclude that no EIT is available that meets the Access Board’s technical provisions?
An agency may conclude that EIT meeting the applicable technical provisions of the Access Board’s standards is not available (and purchase EIT that does not meet those provisions) when it...
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
ANSWER: The performance standard and other requirements of section 37.42(a) apply to stations that are approved for entry into final design or that begin construction or alteration...
-
224.7 Housing at a place of education
The term "sleeping room" is intended to be used interchangeably with the term "guest room" as it is used in the transient lodging standards. Exceptions: 1....